Accredited Standards

Accredited Standards

Applied Testing & Geosciences, LLC is accredited for the following inspection standards, test methods, specifications and acceptance criteria:

• AASHTO M6 – Fine Aggregate for Hydraulic Cement Concrete
• AASHTO M80 – Coarse Aggregate for Hydraulic Cement Concrete
• AASHTO M85 – Portland Cement
• AASHTO M145 – Classification of Soils and Soil-Aggregate Mixtures for Highway Construction Purposes
• AASHTO M154 – Air-Entraining Admixtures for Concrete
• AASHTO M157 – Ready-Mixed Concrete
• AASHTO M194 – Chemical Admixtures for Concrete
• AASHTO M201 – Mixing Rooms, Moist Cabinets, Moist Rooms, and Water Storage Tanks Used in the Testing of Hydraulic Cements and Concretes
• AASHTO M240 – Blended Hydraulic Cement
• AASHTO M288 – Geosynthetic Specification for Highway Applications
• AASHTO M302 – Slag Cement for Use in Concrete and Mortars
• AASHTO M307 – Silica Fume Used in Cementitious Mixtures
• AASHTO R18 – Establishing and Implementing a Quality Management System for Construction Materials Testing Laboratories
• AASHTO R39 – Making and Curing Concrete Test Specimens in the Laboratory
• AASHTO R60 – Sampling Freshly Mixed Concrete
• AASHTO R70 – Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete
• AASHTO T2 – Sampling of Aggregates
• AASHTO T11 – Materials Finer Than 75-µm (No. 200) Sieve in Mineral Aggregates by Washing
• AASHTO T19 – Bulk Density (“Unit Weight”) and Voids in Aggregate
• AASHTO T21 – Organic Impurities in Fine Aggregates for Concrete
• AASHTO T22 – Compressive Strength of Cylindrical Concrete Specimens
• AASHTO T23 – Making and Curing Concrete Test Specimens in the Field
• AASHTO T24 – Obtaining and Testing Drilled Cores and Sawed Beams of Concrete
• AASHTO T27 – Sieve Analysis of Fine and Coarse Aggregates
• AASHTO T71 – Effect of Organic Impurities in Fine Aggregate on Strength of Mortar
• AASHTO T84 – Specific Gravity and Absorption of Fine Aggregate
• AASHTO T85 – Specific Gravity and Absorption of Coarse Aggregate
• AASHTO T88 – Particle Size Analysis of Soils
• AASHTO T89 – Determining the Liquid Limit of Soils
• AASHTO T90 – Determining the Plastic Limit and Plasticity Index of Soils
• AASHTO T96 – Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine
• AASHTO T97 – Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
• AASHTO T99 – Moisture-Density Relations of Soils Using a 2.5-kg (5.5-lb) Rammer and a 305-mm (12-in.) Drop
• AASHTO T100 – Specific Gravity of Soils
• AASHTO T103 – Soundness of Aggregates by Freezing and Thawing
• AASHTO T104 – Soundness of Aggregate by Use of Sodium Sulfate or Magnesium Sulfate
• AASHTO T105 – Chemical Analysis of Hydraulic Cement
• AASHTO T106 – Compressive Strength of Hydraulic Cement Mortar (Using 50-mm or 2-in. Cube Specimens)
• AASHTO T112 – Clay Lumps and Friable Particles in Aggregate
• AASHTO T119 – Slump of Hydraulic Cement Concrete
• AASHTO T121 – Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete
• AASHTO T131 – Time of Setting of Hydraulic Cement by Vicat Needle
• AASHTO T148 – Measuring Length of Drilled Concrete Cores
• AASHTO T152 – Air Content of Freshly Mixed Concrete by the Pressure Method
• AASHTO T153 – Fineness of Hydraulic Cement by Air Permeability Apparatus
• AASHTO T157 – Air-Entraining Admixtures for Concrete
• AASHTO T158 – Bleeding of Concrete
• AASHTO T161 – Resistance of Concrete to Rapid Freezing and Thawing
• AASHTO T177 – Flexural Strength of Concrete (Using Simple Beam with Center-Point Loading)
• AASHTO T180 – Moisture-Density Relations of Soils Using a 4.54-kg (10-lb) Rammer and a 457-mm (18-in.) Drop
• AASHTO T193 – The California Bearing Ratio
• AASHTO T196 – Air Content of Freshly Mixed Concrete by the Volumetric Method
• AASHTO T197 – Time of Setting of Concrete Mixtures by Penetration Resistance
• AASHTO T198 – Splitting Tensile Strength of Cylindrical Concrete Specimens
• AASHTO T208 – Unconfined Compressive Strength of Cohesive Soil
• AASHTO T231 – Capping Cylindrical Concrete Specimens
• AASHTO T236 – Direct Shear Test of Soils under Consolidated Drained Conditions
• AASHTO T248 – Reducing Samples of Aggregate to Testing Size
• AASHTO T255 – Total Evaporable Moisture Content of Aggregate by Drying
• AASHTO T260 – Sampling and Testing for Chloride Ion in Concrete and Concrete Raw Materials
• AASHTO T265 – Laboratory Determination of Moisture Content of Soils
• AASHTO T267 – Determination of Organic Content in Soils by Loss on Ignition
• AASHTO T280 – Concrete Pipe, Manhole Sections, or Tile
• AASHTO T303 – Accelerated Detection of Potentially Deleterious Expansion of Mortar Bars Due to Alkali-Silica Reaction
• AASHTO T309 – Temperature of Freshly Mixed Portland Cement Concrete
• AASHTO T358 – Surface Resistivity Indication of Concrete’s Ability to Resist Chloride Ion Penetration
• AISI S901 – Rotational-Lateral Stiffness of Beam-to-Panel Assemblies
• AISI S902 – Effective Area of Cold-Formed Steel Compression Members
• AISI S903 – Uniform and Local Ductility of Carbon and Low-Alloy Steels
• AISI S904 – Tensile and Shear Strengths of Steel Screws
• AISI S905 – Strength and Deformation Characteristics of Cold-Formed Steel Connections
• AISI S906 – Load-Carrying Strength of Panels and Anchor-to-Panel Attachments for Roof or Siding Systems
• AISI S907 – Strength and Stiffness of Cold-Formed Steel Diaphragms by the Cantilever Test Method
• AISI S908 – Flexural Strength Reduction Factor of Purlins Supporting a Standing Seam Roof System
• AISI S909 – Web Crippling Strength of Cold-Formed Steel Flexural Members
• AISI S910 – Distortional Buckling Strength of Cold-Formed Steel Hat-Shaped Compression Members
• AISI S911 – Flexural Strength of Cold-Formed Steel Hat-Shaped Members
• AISI S912 – Strength of a Roof Panel-to-Purlin-to-Anchorage Device Connection
• AISI S913 – Strength and Deformation Behavior of Hold-Downs Attached to Cold-Formed Steel Structural Framing
• AISI S914 – Strength and Deformation Behavior of Joist Connectors Attached to Cold-Formed Steel Structural Framing
• ASTM A370 – Mechanical Testing of Steel Products
• ASTM A881 – Steel Wire, Indented, Low-Relaxation for Prestressed Concrete
• ASTM A898 – Straight Beam Ultrasonic Examination of Rolled Steel Structural Shapes
• ASTM B117 – Operating Salt Spray (Fog) Apparatus
• ASTM C29 – Bulk Density (“Unit Weight”) and Voids in Aggregate
• ASTM C31 – Making and Curing Concrete Test Specimens in the Field
• ASTM C33 – Concrete Aggregates
• ASTM C39 – Compressive Strength of Cylindrical Concrete Specimens
• ASTM C40 – Organic Impurities in Fine Aggregates for Concrete
• ASTM C42 – Obtaining and Testing Drilled Cores and Sawed Beams of Concrete
• ASTM C50 – Sampling, Sample Preparation, Packaging, and Marking of Lime and Limestone Products
• ASTM C55 – Concrete Building Brick
• ASTM C62 – Building Brick (Solid Masonry Units Made From Clay or Shale)
• ASTM C67 – Sampling and Testing Brick and Structural Clay Tile
• ASTM C70 – Surface Moisture in Fine Aggregate
• ASTM C73 – Calcium Silicate Brick (Sand-Lime Brick)
• ASTM C78 – Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
• ASTM C87 – Effect of Organic Impurities in Fine Aggregate on Strength of Mortar
• ASTM C88 – Soundness of Aggregates by Use of Sodium Sulfate or Magnesium Sulfate
• ASTM C90 – Loadbearing Concrete Masonry Units
• ASTM C91 – Masonry Cement
• ASTM C94 – Ready-Mixed Concrete
• ASTM C97 – Absorption and Bulk Specific Gravity of Dimension Stone
• ASTM C109 – Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens)
• ASTM C110 – Physical Testing of Quicklime, Hydrated Lime, and Limestone
• ASTM C114 – Chemical Analysis of Hydraulic Cement
• ASTM C117 – Materials Finer than 75-μm (No. 200) Sieve in Mineral Aggregates by Washing
• ASTM C127 – Relative Density (Specific Gravity) and Absorption of Coarse Aggregate
• ASTM C128 – Relative Density (Specific Gravity) and Absorption of Fine Aggregate
• ASTM C129 – Nonloadbearing Concrete Masonry Units
• ASTM C131 – Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine
• ASTM C136 – Sieve Analysis of Fine and Coarse Aggregates
• ASTM C138 – Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete
• ASTM C140 – Sampling and Testing Concrete Masonry Units and Related Units
• ASTM C142 – Clay Lumps and Friable Particles in Aggregates
• ASTM C143 – Slump of Hydraulic-Cement Concrete
• ASTM C150 – Portland Cement
• ASTM C151 – Autoclave Expansion of Hydraulic Cement
• ASTM C157 – Length Change of Hardened Hydraulic-Cement Mortar and Concrete
• ASTM C172 – Sampling Freshly Mixed Concrete
• ASTM C173 – Air Content of Freshly Mixed Concrete by the Volumetric Method
• ASTM C174 – Measuring Thickness of Concrete Elements Using Drilled Concrete Cores
• ASTM C183 – Sampling and the Amount of Testing of Hydraulic Cement
• ASTM C185 – Air Content of Hydraulic Cement Mortar
• ASTM C187 – Amount of Water Required for Normal Consistency of Hydraulic Cement Paste
• ASTM C188 – Density of Hydraulic Cement
• ASTM C190 – Tensile Strength of Hydraulic Cement Mortars
• ASTM C191 – Time of Setting of Hydraulic Cement by Vicat Needle
• ASTM C192 – Making and Curing Concrete Test Specimens in the Laboratory
• ASTM C204 – Fineness of Hydraulic Cement by Air-Permeability Apparatus
• ASTM C207 – Hydrated Lime for Masonry Purposes
• ASTM C215 – Fundamental Transverse, Longitudinal, and Torsional Resonant Frequencies of Concrete Specimens
• ASTM C216 – Facing Brick (Solid Masonry Units Made from Clay or Shale)
• ASTM C219 – Hydraulic and Other Inorganic Cements
• ASTM C227 – Potential Alkali Reactivity of Cement-Aggregate Combinations (Mortar-Bar Method)
• ASTM C230 – Flow Table for Use in Tests of Hydraulic Cement
• ASTM C231 – Air Content of Freshly Mixed Concrete by the Pressure Method
• ASTM C232 – Bleeding of Concrete
• ASTM C233 – Air-Entraining Admixtures for Concrete
• ASTM C260 – Air-Entraining Admixtures for Concrete
• ASTM C265 – Water-Extractable Sulfate in Hydrated Hydraulic Cement Mortar
• ASTM C266 – Time of Setting of Hydraulic-Cement Paste by Gillmore Needles
• ASTM C270 – Mortar for Unit Masonry
• ASTM C271 – Density of Sandwich Core Materials
• ASTM C272 – Water Absorption of Core Materials for Sandwich Constructions
• ASTM C293 – Flexural Strength of Concrete (Using Simple Beam With Center-Point Loading)
• ASTM C295 – Petrographic Examination of Aggregates for Concrete
• ASTM C305 – Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency
• ASTM C311 – Sampling and Testing Fly Ash or Natural Pozzolans for Use in Portland-Cement Concrete
• ASTM C348 – Flexural Strength of Hydraulic-Cement Mortars
• ASTM C349 – Compressive Strength of Hydraulic-Cement Mortars (Using Portions of Prisms Broken in Flexure)
• ASTM C359 – Early Stiffening of Hydraulic Cement (Mortar Method)
• ASTM C387 – Packaged, Dry, Combined Materials for Concrete and High Strength Mortar
• ASTM C403 – Time of Setting of Concrete Mixtures by Penetration Resistance
• ASTM C404 – Aggregates for Masonry Grout
• ASTM C426 – Linear Drying Shrinkage of Concrete Masonry Units
• ASTM C430 – Fineness of Hydraulic Cement by the 45-μm (No. 325) Sieve
• ASTM C451 – Early Stiffening of Hydraulic Cement (Paste Method)
• ASTM C452 – Potential Expansion of Portland-Cement Mortars Exposed to Sulfate
• ASTM C457 – Microscopical Determination of Parameters of the Air-Void System in Hardened Concrete
• ASTM C465 – Processing Additions for Use in the Manufacture of Hydraulic Cements
• ASTM C470 – Molds for Forming Concrete Test Cylinders Vertically
• ASTM C472 – Physical Testing of Gypsum, Gypsum Plasters, and Gypsum Concrete
• ASTM C476 – Grout for Masonry
• ASTM C482 – Bond Strength of Ceramic Tile to Portland Cement Paste
• ASTM C494 – Chemical Admixtures for Concrete
• ASTM C495 – Compressive Strength of Lightweight Insulating Concrete
• ASTM C496 – Splitting Tensile Strength of Cylindrical Concrete Specimens
• ASTM C497 – Concrete Pipe, Concrete Box Sections, Manhole Sections, or Tile
• ASTM C511 – Mixing Rooms, Moist Cabinets, Moist Rooms, and Water Storage Tanks Used in the Testing of Hydraulic Cements and Concretes
• ASTM C513 – Obtaining and Testing Specimens of Hardened Lightweight Insulating Concrete for Compressive Strength
• ASTM C531 – Linear Shrinkage and Coefficient of Thermal Expansion of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes
• ASTM C535 – Resistance to Degradation of Large-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine
• ASTM C563 – Approximation of Optimum SO3 in Hydraulic Cement
• ASTM C566 – Total Evaporable Moisture Content of Aggregate by Drying
• ASTM C567 – Determining Density of Structural Lightweight Concrete
• ASTM C579 – Compressive Strength of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes
• ASTM C595 – Blended Hydraulic Cements
• ASTM C617 – Capping Cylindrical Concrete Specimens
• ASTM C618 – Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete
• ASTM C652 – Hollow Brick (Hollow Masonry Units Made From Clay or Shale)
• ASTM C666 – Resistance of Concrete to Rapid Freezing and Thawing
• ASTM C702 – Reducing Samples of Aggregate to Testing Size
• ASTM C779 – Abrasion Resistance of Horizontal Concrete Surfaces
• ASTM C780 – Preconstruction and Construction Evaluation of Mortars for Plain and Reinforced Unit Masonry
• ASTM C796 – Foaming Agents for Use in Producing Cellular Concrete Using Preformed Foam
• ASTM C803 – Penetration Resistance of Hardened Concrete
• ASTM C805 – Rebound Number of Hardened Concrete
• ASTM C823 – Examination and Sampling of Hardened Concrete in Constructions
• ASTM C856 – Petrographic Examination of Hardened Concrete
• ASTM C869 – Foaming Agents Used in Making Preformed Foam for Cellular Concrete
• ASTM C873 – Compressive Strength of Concrete Cylinders Cast in Place in Cylindrical Molds
• ASTM C900 – Pullout Strength of Hardened Concrete
• ASTM C928 – Packaged, Dry, Rapid-Hardening Cementitious Materials for Concrete Repairs
• ASTM C936 – Solid Concrete Interlocking Paving Units
• ASTM C937 – Grout Fluidifier for Preplaced-Aggregate Concrete
• ASTM C942 – Compressive Strength of Grouts for Preplaced-Aggregate Concrete in the Laboratory
• ASTM C954 – Steel Drill Screws for the Application of Gypsum Panel Products or Metal Plaster Bases to Steel Studs from 0.033 in. (0.84 mm) to 0.112 in. (2.84 mm) in Thickness
• ASTM C985 – Nonreinforced Concrete Specified Strength Culvert, Storm Drain, and Sewer Pipe
• ASTM C989 – Slag Cement for Use in Concrete and Mortars
• ASTM C1006 – Splitting Tensile Strength of Masonry Units
• ASTM C1012 – Length Change of Hydraulic-Cement Mortars Exposed to a Sulfate Solution
• ASTM C1017 – Chemical Admixtures for Use in Producing Flowing Concrete
• ASTM C1019 – Sampling and Testing Grout for Masonry
• ASTM C1028 – Determining the Static Coefficient of Friction of Ceramic Tile and Other Like Surfaces by the Horizontal Dynamometer Pull-Meter Method
• ASTM C1038 – Expansion of Hydraulic Cement Mortar Bars Stored in Water
• ASTM C1040 – In-Place Density of Unhardened and Hardened Concrete, Including Roller Compacted Concrete, By Nuclear Methods
• ASTM C1064 – Temperature of Freshly Mixed Hydraulic-Cement Concrete
• ASTM C1077 – Agencies Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Testing Agency Evaluation
• ASTM C1093 – Accreditation of Testing Agencies for Masonry
• ASTM C1105 – Length Change of Concrete Due to Alkali-Carbonate Rock Reaction
• ASTM C1107 – Packaged Dry, Hydraulic-Cement Grout (Nonshrink)
• ASTM C1116 – Fiber-Reinforced Concrete
• ASTM C1140 – Preparing and Testing Specimens from Shotcrete Test Panels
• ASTM C1152 – Acid-Soluble Chloride in Mortar and Concrete
• ASTM C1157 – Hydraulic Cement
• ASTM C1218 – Water-Soluble Chloride in Mortar and Concrete
• ASTM C1222 – Evaluation of Laboratories Testing Hydraulic Cement
• ASTM C1231 – Use of Unbonded Caps in Determination of Compressive Strength of Hardened Cylindrical Concrete Specimens
• ASTM C1240 – Silica Fume Used in Cementitious Mixtures
• ASTM C1260 – Potential Alkali Reactivity of Aggregates (Mortar-Bar Method)
• ASTM C1262 – Evaluating the Freeze-Thaw Durability of Dry-Cast Segmental Retaining Wall Units and Related Concrete Units
• ASTM C1293 – Determination of Length Change of Concrete Due to Alkali-Silica Reaction
• ASTM C1314 – Compressive Strength of Masonry Prisms
• ASTM C1319 – Concrete Grid Paving Units
• ASTM C1329 – Mortar Cement
• ASTM C1372 – Dry-Cast Segmental Retaining Wall Units
• ASTM C1385 – Sampling Materials for Shotcrete
• ASTM C1399 – Obtaining Average Residual-Strength of Fiber-Reinforced Concrete
• ASTM C1437 – Flow of Hydraulic Cement Mortar
• ASTM C1491 – Concrete Roof Pavers
• ASTM C1506 – Water Retention of Hydraulic Cement-Based Mortars and Plasters
• ASTM C1513 – Steel Tapping Screws for Cold-Formed Steel Framing Connections
• ASTM C1524 – Water-Extractable Chloride in Aggregate (Soxhlet Method)
• ASTM C1556 – Determining the Apparent Chloride Diffusion Coefficient of Cementitious Mixtures by Bulk Diffusion
• ASTM C1567 – Determining the Potential Alkali-Silica Reactivity of Combinations of Cementitious Materials and Aggregate (Accelerated Mortar-Bar Method)
• ASTM C1585 – Measurement of Rate of Absorption of Water by Hydraulic-Cement Concretes
• ASTM C1586 – Quality Assurance of Mortars
• ASTM C1604 – Obtaining and Testing Drilled Cores of Shotcrete
• ASTM C1611 – Slump Flow of Self-Consolidating Concrete
• ASTM C1645 – Freeze-thaw and De-icing Salt Durability of Solid Concrete Interlocking Paving Units
• ASTM C1670 – Adhered Manufactured Stone Masonry Veneer Units
• ASTM C1688 – Density and Void Content of Freshly Mixed Pervious Concrete
• ASTM C1697 – Blended Supplementary Cementitious Materials
• ASTM C1704 – Sampling and Testing Structural Cementitious Panels
• ASTM C1714 – Preblended Dry Mortar Mix for Unit Masonry
• ASTM C1754 – Density and Void Content of Hardened Pervious Concrete
• ASTM D75 – Sampling Aggregates
• ASTM D127 – Drop Melting Point of Petroleum Wax, Including Petrolatum
• ASTM D143 – Small Clear Specimens of Timber
• ASTM D198 – Static Tests of Lumber in Structural Sizes
• ASTM D422 – Particle-Size Analysis of Soils
• ASTM D638 – Tensile Properties of Plastics
• ASTM D695 – Compressive Properties of Rigid Plastics
• ASTM D698 – Laboratory Compaction Characteristics of Soil Using Standard Effort
• ASTM D854 – Specific Gravity of Soil Solids by Water Pycnometer
• ASTM D891 – Specific Gravity, Apparent, of Liquid Industrial Chemicals
• ASTM D1037 – Evaluating Properties of Wood-Base Fiber and Particle Panel Materials
• ASTM D1140 – Determining the Amount of Material Finer than 75-μm (No. 200) Sieve in Soils by Washing
• ASTM D1143 – Deep Foundation Elements Under Static Axial Compressive Load
• ASTM D1557 – Laboratory Compaction Characteristics of Soil Using Modified Effort
• ASTM D1761 – Mechanical Fasteners in Wood and Wood-Based Materials
• ASTM D1883 – California Bearing Ratio (CBR) of Laboratory-Compacted Soils
• ASTM D2166 – Unconfined Compressive Strength of Cohesive Soil
• ASTM D2216 – Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass
• ASTM D2395 – Density and Specific Gravity (Relative Density) of Wood and Wood-Based Materials
• ASTM D2487 – Classification of Soils for Engineering Purposes (Unified Soil Classification System)
• ASTM D2915 – Sampling and Data-Analysis for Structural Wood and Wood-Based Products
• ASTM D2936 – Direct Tensile Strength of Intact Rock Core Specimens
• ASTM D2938 – Unconfined Compressive Strength of Intact Rock Core Specimens
• ASTM D2950 – Density of Bituminous Concrete in Place by Nuclear Methods
• ASTM D2974 – Moisture, Ash, and Organic Matter of Peat and Other Organic Soils
• ASTM D3080 – Direct Shear Test of Soils Under Consolidated Drained Conditions
• ASTM D3142 – Specific Gravity, API Gravity, or Density of Cutback Asphalts by Hydrometer Method
• ASTM D3154 – Average Velocity in a Duct (Pitot Tube Method)
• ASTM D3666 – Minimum Requirements for Agencies Testing and Inspecting Road and Paving Materials
• ASTM D3689 – Deep Foundations Under Static Axial Tensile Load
• ASTM D3740 – Minimum Requirements for Agencies Engaged in Testing and/or Inspection of Soil and Rock as Used in Engineering Design and Construction
• ASTM D3966 – Deep Foundations Under Lateral Load
• ASTM D4221 – Dispersive Characteristics of Clay Soil by Double Hydrometer
• ASTM D4318 – Liquid Limit, Plastic Limit, and Plasticity Index of Soils
• ASTM D4442 – Direct Moisture Content Measurement of Wood and Wood-Based Materials
• ASTM D4525 – Permeability of Rocks by Flowing Air
• ASTM D4630 – Determining Transmissivity and Storage Coefficient of Low-Permeability Rocks by In Situ Measurements Using the Constant Head Injection Test
• ASTM D4761 – Mechanical Properties of Lumber and Wood-Based Structural Materials
• ASTM D4791 – Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate
• ASTM D4832 – Preparation and Testing of Controlled Low Strength Material (CLSM) Test Cylinders
• ASTM D4933 – Moisture Conditioning of Wood and Wood-Based Materials
• ASTM D4972 – pH of Soils
• ASTM D5268 – Topsoil Used for Landscaping and Construction Purposes
• ASTM D5361 – Sampling Compacted Asphalt Mixtures for Laboratory Testing
• ASTM D5370 – Pozzolanic Blended Materials in Construction Applications
• ASTM D5821 – Determining the Percentage of Fractured Particles in Coarse Aggregate
• ASTM D5971 – Sampling Freshly Mixed Controlled Low-Strength Material
• ASTM D6913 – Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis
• ASTM D6938 – In-Place Density and Water Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth)
• ASTM D6951 – Use of the Dynamic Cone Penetrometer in Shallow Pavement Applications
• ASTM D7031 – Evaluating Mechanical and Physical Properties of Wood-Plastic Composite Products
• ASTM D7032 – Establishing Performance Ratings for Wood-Plastic Composite and Plastic Lumber Deck Boards, Stair Treads, Guards, and Handrails
• ASTM D7928 – Particle-Size Distribution (Gradation) of Fine-Grained Soils Using the Sedimentation (Hydrometer) Analysis
• ASTM E8 – Tension Testing of Metallic Materials
• ASTM E9 – Compression Testing of Metallic Materials at Room Temperature
• ASTM E11 – Woven Wire Test Sieve Cloth and Test Sieves
• ASTM E18 – Rockwell Hardness of Metallic Materials
• ASTM E70 – pH of Aqueous Solutions With the Glass Electrode
• ASTM E72 – Conducting Strength Tests of Panels for Building Construction
• ASTM E73 – Static Load Testing of Truss Assemblies
• ASTM E96 – Water Vapor Transmission of Materials
• ASTM E100 – ASTM Hydrometers
• ASTM E114 – Ultrasonic Pulse-Echo Straight-Beam Contact Testing
• ASTM E164 – Contact Ultrasonic Testing of Weldments
• ASTM E165 – Liquid Penetrant Testing for General Industry
• ASTM E329 – Agencies Engaged in Construction Inspection, Testing, or Special Inspection
• ASTM E330 – Structural Performance of Exterior Windows, Doors, Skylights and Curtain Walls by Uniform Static Air Pressure Difference
• ASTM E331 – Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Uniform Static Air Pressure Difference
• ASTM E455 – Static Load Testing of Framed Floor or Roof Diaphragm Constructions for Buildings
• ASTM E488 – Strength of Anchors in Concrete Elements
• ASTM E518 – Flexural Bond Strength of Masonry
• ASTM E519 – Diagonal Tension (Shear) in Masonry Assemblages
• ASTM E543 – Agencies Performing Nondestructive Testing
• ASTM E564 – Static Load Test for Shear Resistance of Framed Walls for Buildings
• ASTM E605 – Thickness and Density of Sprayed Fire-Resistive Material (SFRM) Applied to Structural Members
• ASTM E661 – Performance of Wood and Wood-Based Floor and Roof Sheathing Under Concentrated Static and Impact Loads
• ASTM E709 – Magnetic Particle Testing
• ASTM E736 – Cohesion/Adhesion of Sprayed Fire-Resistive Materials Applied to Structural Members
• ASTM E761 – Compressive Strength of Sprayed Fire-Resistive Material Applied to Structural Members
• ASTM E1155 – Determining FF Floor Flatness and FL Floor Levelness Numbers
• ASTM E1190 – Strength of Power-Actuated Fasteners Installed in Structural Members
• ASTM E1252 – General Techniques for Obtaining Infrared Spectra for Qualitative Analysis
• ASTM E1417 – Liquid Penetrant Testing
• ASTM E1444 – Magnetic Particle Testing
• ASTM E1513 – Application of Sprayed Fire-Resistive Materials (SFRMs)
• ASTM E1803 – Determining Strength Capacities of Structural Insulated Panels
• ASTM E2322 – Conducting Transverse and Concentrated Load Tests on Panels used in Floor and Roof Construction
• ASTM F606 – Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets
• ASTM F1470 – Fastener Sampling for Specified Mechanical Properties and Performance Inspection
• ASTM F1575 – Determining Bending Yield Moment of Nails
• ASTM F1869 – Measuring Moisture Vapor Emission Rate of Concrete Subfloor Using Anhydrous Calcium Chloride
• ASTM G85 – Modified Salt Spray (Fog) Testing
• ASTM G109 – Determining Effects of Chemical Admixtures on Corrosion of Embedded Steel Reinforcement in Concrete Exposed to Chloride Environments
• BS EN 480-10 – Admixtures for Concrete, Mortar and Grout
• CRD C48 – Water Permeability of Concrete
• ICC-ES AC01 – Expansion Anchors in Masonry Elements
• ICC-ES AC04 – Sandwich Panels
• ICC-ES AC13 – Joist Hangers and Similar Devices
• ICC-ES AC14 – Prefabricated Wood I-joists
• ICC-ES AC16 – Plastic Glazed Skylights
• ICC-ES AC17 – Glass Glazed Unit Skylights and Sloped Glass Glazing
• ICC-ES AC25 – Metal Composite Material (MCM)
• ICC-ES AC32 – Concrete with Synthetic Fibers
• ICC-ES AC37 – Vinyl Siding
• ICC-ES AC43 – Steel Deck Roof and Floor Systems
• ICC-ES AC51 – Adhered Manufactured Stone Masonry Veneer
• ICC-ES AC58 – Adhesive Anchors in Masonry Elements
• ICC-ES AC70 – Power-actuated Fasteners Driven into Concrete, Steel and Masonry Elements
• ICC-ES AC90 – Fiber Cement Siding Used as Exterior Wall Siding
• ICC-ES AC100 – Air-conditioning Equipment Pads
• ICC-ES AC106 – Predrilled Fasteners (Screw Anchors) in Masonry
• ICC-ES AC116 – Nails
• ICC-ES AC118 – Tapping Screw Fasteners Used in Steel-to-steel Connections
• ICC-ES AC124 – Rim Board Products
• ICC-ES AC125 – Concrete and Reinforced and Unreinforced Masonry Strengthening Using Externally Bonded Fiber-reinforced Polymer (FRP) Composite Systems
• ICC-ES AC129 – Steel Moment Frame Connection Systems
• ICC-ES AC130 – Prefabricated Wood Shear Panels
• ICC-ES AC132 – Attic Vents
• ICC-ES AC133 – Mechanical Splice Systems for Steel Reinforcing Bars
• ICC-ES AC138 – Prefabricated Wall Panels Using Wood I-studs
• ICC-ES AC151 – Fixed-height, Low-profile, Raised Floor Systems
• ICC-ES AC170 – Shear Reinforcement Devices in Structural Concrete
• ICC-ES AC174 – Deck Board Span Ratings and Guardrail Systems (Guards and Handrails)
• ICC-ES AC175 – Raised Floor Systems over Concealed Spaces
• ICC-ES AC182 – Wood Structural Panels
• ICC-ES AC193 – Mechanical Anchors in Concrete Elements
• ICC-ES AC202 – Wood-based Studs
• ICC-ES AC210 – Patio Covers with PVC Plastic Components
• ICC-ES AC213 – Glass Shear Walls and Diaphragms for Patio Covers
• ICC-ES AC214 – Sandwich Panels with Metal Skins and a Foamed-in-place Foam-plastic Insulated Core
• ICC-ES AC233 – Dowel-type Threaded Fasteners Used in Wood
• ICC-ES AC244 – Exterior Doors and Windows
• ICC-ES AC273 – Handrails and Guards
• ICC-ES AC300 – Access Floors
• ICC-ES AC304 – Inspections and Inspection Agencies
• ICC-ES AC308 – Post-installed Adhesive Anchors in Concrete Elements
• ICC-ES AC317 – Metal Connectors Used to Attach Wood and Composite Decking Material
• ICC-ES AC318 – Structural Cementitious Floor and Roof Sheathing Panels
• ICC-ES AC319 – Horizontal Diaphragms
• ICC-ES AC320 – Fiber-reinforced Polymer Composite or Unreinforced Polymer Connectors Anchored in Concrete
• ICC-ES AC322 – Prefabricated, Cold-formed Steel, Lateral-force-resisting Vertical Assemblies
• ICC-ES AC323 – Reinforcement of Openings in Shear Walls with Steel Brackets
• ICC-ES AC331 – Smoke and Heat Vents
• ICC-ES AC333 – Injection Molded Composite Material (IMCM) Wall Panels
• ICC-ES AC335 – Adjustable Steel Columns
• ICC-ES AC340 – Patio Covers
• ICC-ES AC344 – Riveted Connections of Cold-formed Steel Structural Members Using Self-piercing Rivets
• ICC-ES AC345 – Stay-in-place Forms for Post and Beam Concrete Walls
• ICC-ES AC347 – Headed Deformed Bars for use with I-codes
• ICC-ES AC353 – Stay-in-place, Foam Plastic Insulating Concrete Form (ICF) Systems for Solid Concrete Walls
• ICC-ES AC358 – Helical Pile Systems and Devices
• ICC-ES AC367 – Fiber-reinforced Cement Sheet Structural Floor Sheathing
• ICC-ES AC369 – Steel Cable Assemblies
• ICC-ES AC376 – Reinforced Cementitious Sheets Used as Wall and Ceiling Sheathing and Floor Underlayment
• ICC-ES AC377 – Spray-applied Foam Plastic Insulation
• ICC-ES AC379 – Fastening Systems for Use with Re-entrant-type Steel Deck Panel Profiles
• ICC-ES AC390 – Wall Panels with a Welded Steel Perimeter Frame Used in Agricultural Storage Structures
• ICC-ES AC391 – Continuous Rod Tie-down Runs and Continuous Rod Tie-down Systems Used to Resist Wind Uplift
• ICC-ES AC394 – Structural Capacity of Components of Work Cages for Wind Turbine Towers
• ICC-ES AC395 – Headed Shear Stud Reinforcement Assemblies for Concrete Slabs or Footings
• ICC-ES AC408 – Structural Concrete with Lightweight Synthetic Particles
• ICC-ES AC425 – Cold-Formed Steel Structural Beams Acting Compositely with Cast-in-place Concrete Slabs
• ICC-ES AC437 – Blind Bolts in Structural Steel Connections
• ICC-ES AC449 – Tension-controlled Open Web Steel Joists
• ICC-ES AC509 – 3D Automated Construction Technology for 3D Concrete Walls
• ICC-ES AC520 – CO2 Concrete-Based Concrete Masonry Units
• NCMA CMU-WR2 – Spray Bar Test of Concrete Masonry Units
• SAE J78 – Steel Self-Drilling Tapping Screws
• UL 3401 – Outline of Investigation for 3D Printed Building Construction (excluding sections 13.1, 14.3.3, 14.3.9.2, 14.4.2, 14.4.3)

Related inspection standards, test methods, specifications and acceptance criteria: Standards.

Please contact us for more information.