Standards
Inspection Standards, Test Methods, Specifications and Acceptance Criteria
Accredited Standards
Applied Testing & Geosciences, LLC is accredited for the following inspection standards, test methods, specifications and acceptance criteria:
- AASHTO M6 – Fine Aggregate for Hydraulic Cement Concrete
- AASHTO M80 – Coarse Aggregate for Hydraulic Cement Concrete
- AASHTO M85 – Portland Cement
- AASHTO M145 – Classification of Soils and Soil-Aggregate Mixtures for Highway Construction Purposes
- AASHTO M154 – Air-Entraining Admixtures for Concrete
- AASHTO M157 – Ready-Mixed Concrete
- AASHTO M194 – Chemical Admixtures for Concrete
- AASHTO M201 – Mixing Rooms, Moist Cabinets, Moist Rooms, and Water Storage Tanks Used in the Testing of Hydraulic Cements and Concretes
- AASHTO M240 – Blended Hydraulic Cement
- AASHTO M288 – Geosynthetic Specification for Highway Applications
- AASHTO M302 – Slag Cement for Use in Concrete and Mortars
- AASHTO M307 – Silica Fume Used in Cementitious Mixtures
- AASHTO R18 – Establishing and Implementing a Quality Management System for Construction Materials Testing Laboratories
- AASHTO R39 – Making and Curing Concrete Test Specimens in the Laboratory
- AASHTO R60 – Sampling Freshly Mixed Concrete
- AASHTO R70 – Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete
- AASHTO T2 – Sampling of Aggregates
- AASHTO T11 – Materials Finer Than 75-µm (No. 200) Sieve in Mineral Aggregates by Washing
- AASHTO T19 – Bulk Density (“Unit Weight”) and Voids in Aggregate
- AASHTO T21 – Organic Impurities in Fine Aggregates for Concrete
- AASHTO T22 – Compressive Strength of Cylindrical Concrete Specimens
- AASHTO T23 – Making and Curing Concrete Test Specimens in the Field
- AASHTO T24 – Obtaining and Testing Drilled Cores and Sawed Beams of Concrete
- AASHTO T27 – Sieve Analysis of Fine and Coarse Aggregates
- AASHTO T71 – Effect of Organic Impurities in Fine Aggregate on Strength of Mortar
- AASHTO T84 – Specific Gravity and Absorption of Fine Aggregate
- AASHTO T85 – Specific Gravity and Absorption of Coarse Aggregate
- AASHTO T88 – Particle Size Analysis of Soils
- AASHTO T89 – Determining the Liquid Limit of Soils
- AASHTO T90 – Determining the Plastic Limit and Plasticity Index of Soils
- AASHTO T96 – Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine
- AASHTO T97 – Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
- AASHTO T99 – Moisture-Density Relations of Soils Using a 2.5-kg (5.5-lb) Rammer and a 305-mm (12-in.) Drop
- AASHTO T100 – Specific Gravity of Soils
- AASHTO T103 – Soundness of Aggregates by Freezing and Thawing
- AASHTO T104 – Soundness of Aggregate by Use of Sodium Sulfate or Magnesium Sulfate
- AASHTO T105 – Chemical Analysis of Hydraulic Cement
- AASHTO T106 – Compressive Strength of Hydraulic Cement Mortar (Using 50-mm or 2-in. Cube Specimens)
- AASHTO T112 – Clay Lumps and Friable Particles in Aggregate
- AASHTO T119 – Slump of Hydraulic Cement Concrete
- AASHTO T121 – Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete
- AASHTO T131 – Time of Setting of Hydraulic Cement by Vicat Needle
- AASHTO T148 – Measuring Length of Drilled Concrete Cores
- AASHTO T152 – Air Content of Freshly Mixed Concrete by the Pressure Method
- AASHTO T153 – Fineness of Hydraulic Cement by Air Permeability Apparatus
- AASHTO T157 – Air-Entraining Admixtures for Concrete
- AASHTO T158 – Bleeding of Concrete
- AASHTO T161 – Resistance of Concrete to Rapid Freezing and Thawing
- AASHTO T177 – Flexural Strength of Concrete (Using Simple Beam with Center-Point Loading)
- AASHTO T180 – Moisture-Density Relations of Soils Using a 4.54-kg (10-lb) Rammer and a 457-mm (18-in.) Drop
- AASHTO T193 – The California Bearing Ratio
- AASHTO T196 – Air Content of Freshly Mixed Concrete by the Volumetric Method
- AASHTO T197 – Time of Setting of Concrete Mixtures by Penetration Resistance
- AASHTO T198 – Splitting Tensile Strength of Cylindrical Concrete Specimens
- AASHTO T208 – Unconfined Compressive Strength of Cohesive Soil
- AASHTO T231 – Capping Cylindrical Concrete Specimens
- AASHTO T236 – Direct Shear Test of Soils under Consolidated Drained Conditions
- AASHTO T248 – Reducing Samples of Aggregate to Testing Size
- AASHTO T255 – Total Evaporable Moisture Content of Aggregate by Drying
- AASHTO T260 – Sampling and Testing for Chloride Ion in Concrete and Concrete Raw Materials
- AASHTO T265 – Laboratory Determination of Moisture Content of Soils
- AASHTO T267 – Determination of Organic Content in Soils by Loss on Ignition
- AASHTO T280 – Concrete Pipe, Manhole Sections, or Tile
- AASHTO T303 – Accelerated Detection of Potentially Deleterious Expansion of Mortar Bars Due to Alkali-Silica Reaction
- AASHTO T309 – Temperature of Freshly Mixed Portland Cement Concrete
- AASHTO T358 – Surface Resistivity Indication of Concrete’s Ability to Resist Chloride Ion Penetration
- AISI S901 – Rotational-Lateral Stiffness of Beam-to-Panel Assemblies
- AISI S902 – Effective Area of Cold-Formed Steel Compression Members
- AISI S903 – Uniform and Local Ductility of Carbon and Low-Alloy Steels
- AISI S904 – Tensile and Shear Strengths of Steel Screws
- AISI S905 – Strength and Deformation Characteristics of Cold-Formed Steel Connections
- AISI S906 – Load-Carrying Strength of Panels and Anchor-to-Panel Attachments for Roof or Siding Systems
- AISI S907 – Strength and Stiffness of Cold-Formed Steel Diaphragms by the Cantilever Test Method
- AISI S908 – Flexural Strength Reduction Factor of Purlins Supporting a Standing Seam Roof System
- AISI S909 – Web Crippling Strength of Cold-Formed Steel Flexural Members
- AISI S910 – Distortional Buckling Strength of Cold-Formed Steel Hat-Shaped Compression Members
- AISI S911 – Flexural Strength of Cold-Formed Steel Hat-Shaped Members
- AISI S912 – Strength of a Roof Panel-to-Purlin-to-Anchorage Device Connection
- AISI S913 – Strength and Deformation Behavior of Hold-Downs Attached to Cold-Formed Steel Structural Framing
- AISI S914 – Strength and Deformation Behavior of Joist Connectors Attached to Cold-Formed Steel Structural Framing
- ASTM A370 – Mechanical Testing of Steel Products
- ASTM A881 – Steel Wire, Indented, Low-Relaxation for Prestressed Concrete
- ASTM A898 – Straight Beam Ultrasonic Examination of Rolled Steel Structural Shapes
- ASTM B117 – Operating Salt Spray (Fog) Apparatus
- ASTM C29 – Bulk Density (“Unit Weight”) and Voids in Aggregate
- ASTM C31 – Making and Curing Concrete Test Specimens in the Field
- ASTM C33 – Concrete Aggregates
- ASTM C39 – Compressive Strength of Cylindrical Concrete Specimens
- ASTM C40 – Organic Impurities in Fine Aggregates for Concrete
- ASTM C42 – Obtaining and Testing Drilled Cores and Sawed Beams of Concrete
- ASTM C50 – Sampling, Sample Preparation, Packaging, and Marking of Lime and Limestone Products
- ASTM C55 – Concrete Building Brick
- ASTM C62 – Building Brick (Solid Masonry Units Made From Clay or Shale)
- ASTM C67 – Sampling and Testing Brick and Structural Clay Tile
- ASTM C70 – Surface Moisture in Fine Aggregate
- ASTM C73 – Calcium Silicate Brick (Sand-Lime Brick)
- ASTM C78 – Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
- ASTM C87 – Effect of Organic Impurities in Fine Aggregate on Strength of Mortar
- ASTM C88 – Soundness of Aggregates by Use of Sodium Sulfate or Magnesium Sulfate
- ASTM C90 – Loadbearing Concrete Masonry Units
- ASTM C91 – Masonry Cement
- ASTM C94 – Ready-Mixed Concrete
- ASTM C97 – Absorption and Bulk Specific Gravity of Dimension Stone
- ASTM C109 – Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens)
- ASTM C110 – Physical Testing of Quicklime, Hydrated Lime, and Limestone
- ASTM C114 – Chemical Analysis of Hydraulic Cement
- ASTM C117 – Materials Finer than 75-μm (No. 200) Sieve in Mineral Aggregates by Washing
- ASTM C127 – Relative Density (Specific Gravity) and Absorption of Coarse Aggregate
- ASTM C128 – Relative Density (Specific Gravity) and Absorption of Fine Aggregate
- ASTM C129 – Nonloadbearing Concrete Masonry Units
- ASTM C131 – Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine
- ASTM C136 – Sieve Analysis of Fine and Coarse Aggregates
- ASTM C138 – Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete
- ASTM C140 – Sampling and Testing Concrete Masonry Units and Related Units
- ASTM C142 – Clay Lumps and Friable Particles in Aggregates
- ASTM C143 – Slump of Hydraulic-Cement Concrete
- ASTM C150 – Portland Cement
- ASTM C151 – Autoclave Expansion of Hydraulic Cement
- ASTM C157 – Length Change of Hardened Hydraulic-Cement Mortar and Concrete
- ASTM C172 – Sampling Freshly Mixed Concrete
- ASTM C173 – Air Content of Freshly Mixed Concrete by the Volumetric Method
- ASTM C174 – Measuring Thickness of Concrete Elements Using Drilled Concrete Cores
- ASTM C183 – Sampling and the Amount of Testing of Hydraulic Cement
- ASTM C185 – Air Content of Hydraulic Cement Mortar
- ASTM C187 – Amount of Water Required for Normal Consistency of Hydraulic Cement Paste
- ASTM C188 – Density of Hydraulic Cement
- ASTM C190 – Tensile Strength of Hydraulic Cement Mortars
- ASTM C191 – Time of Setting of Hydraulic Cement by Vicat Needle
- ASTM C192 – Making and Curing Concrete Test Specimens in the Laboratory
- ASTM C204 – Fineness of Hydraulic Cement by Air-Permeability Apparatus
- ASTM C207 – Hydrated Lime for Masonry Purposes
- ASTM C215 – Fundamental Transverse, Longitudinal, and Torsional Resonant Frequencies of Concrete Specimens
- ASTM C216 – Facing Brick (Solid Masonry Units Made from Clay or Shale)
- ASTM C219 – Hydraulic and Other Inorganic Cements
- ASTM C227 – Potential Alkali Reactivity of Cement-Aggregate Combinations (Mortar-Bar Method)
- ASTM C230 – Flow Table for Use in Tests of Hydraulic Cement
- ASTM C231 – Air Content of Freshly Mixed Concrete by the Pressure Method
- ASTM C232 – Bleeding of Concrete
- ASTM C233 – Air-Entraining Admixtures for Concrete
- ASTM C260 – Air-Entraining Admixtures for Concrete
- ASTM C265 – Water-Extractable Sulfate in Hydrated Hydraulic Cement Mortar
- ASTM C266 – Time of Setting of Hydraulic-Cement Paste by Gillmore Needles
- ASTM C270 – Mortar for Unit Masonry
- ASTM C271 – Density of Sandwich Core Materials
- ASTM C272 – Water Absorption of Core Materials for Sandwich Constructions
- ASTM C293 – Flexural Strength of Concrete (Using Simple Beam With Center-Point Loading)
- ASTM C295 – Petrographic Examination of Aggregates for Concrete
- ASTM C305 – Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency
- ASTM C311 – Sampling and Testing Fly Ash or Natural Pozzolans for Use in Portland-Cement Concrete
- ASTM C348 – Flexural Strength of Hydraulic-Cement Mortars
- ASTM C349 – Compressive Strength of Hydraulic-Cement Mortars (Using Portions of Prisms Broken in Flexure)
- ASTM C359 – Early Stiffening of Hydraulic Cement (Mortar Method)
- ASTM C387 – Packaged, Dry, Combined Materials for Concrete and High Strength Mortar
- ASTM C403 – Time of Setting of Concrete Mixtures by Penetration Resistance
- ASTM C404 – Aggregates for Masonry Grout
- ASTM C426 – Linear Drying Shrinkage of Concrete Masonry Units
- ASTM C430 – Fineness of Hydraulic Cement by the 45-μm (No. 325) Sieve
- ASTM C451 – Early Stiffening of Hydraulic Cement (Paste Method)
- ASTM C452 – Potential Expansion of Portland-Cement Mortars Exposed to Sulfate
- ASTM C457 – Microscopical Determination of Parameters of the Air-Void System in Hardened Concrete
- ASTM C465 – Processing Additions for Use in the Manufacture of Hydraulic Cements
- ASTM C470 – Molds for Forming Concrete Test Cylinders Vertically
- ASTM C472 – Physical Testing of Gypsum, Gypsum Plasters, and Gypsum Concrete
- ASTM C476 – Grout for Masonry
- ASTM C482 – Bond Strength of Ceramic Tile to Portland Cement Paste
- ASTM C494 – Chemical Admixtures for Concrete
- ASTM C495 – Compressive Strength of Lightweight Insulating Concrete
- ASTM C496 – Splitting Tensile Strength of Cylindrical Concrete Specimens
- ASTM C497 – Concrete Pipe, Concrete Box Sections, Manhole Sections, or Tile
- ASTM C511 – Mixing Rooms, Moist Cabinets, Moist Rooms, and Water Storage Tanks Used in the Testing of Hydraulic Cements and Concretes
- ASTM C513 – Obtaining and Testing Specimens of Hardened Lightweight Insulating Concrete for Compressive Strength
- ASTM C531 – Linear Shrinkage and Coefficient of Thermal Expansion of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes
- ASTM C535 – Resistance to Degradation of Large-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine
- ASTM C563 – Approximation of Optimum SO3 in Hydraulic Cement
- ASTM C566 – Total Evaporable Moisture Content of Aggregate by Drying
- ASTM C567 – Determining Density of Structural Lightweight Concrete
- ASTM C579 – Compressive Strength of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes
- ASTM C595 – Blended Hydraulic Cements
- ASTM C617 – Capping Cylindrical Concrete Specimens
- ASTM C618 – Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete
- ASTM C652 – Hollow Brick (Hollow Masonry Units Made From Clay or Shale)
- ASTM C666 – Resistance of Concrete to Rapid Freezing and Thawing
- ASTM C702 – Reducing Samples of Aggregate to Testing Size
- ASTM C779 – Abrasion Resistance of Horizontal Concrete Surfaces
- ASTM C780 – Preconstruction and Construction Evaluation of Mortars for Plain and Reinforced Unit Masonry
- ASTM C796 – Foaming Agents for Use in Producing Cellular Concrete Using Preformed Foam
- ASTM C803 – Penetration Resistance of Hardened Concrete
- ASTM C805 – Rebound Number of Hardened Concrete
- ASTM C823 – Examination and Sampling of Hardened Concrete in Constructions
- ASTM C856 – Petrographic Examination of Hardened Concrete
- ASTM C869 – Foaming Agents Used in Making Preformed Foam for Cellular Concrete
- ASTM C873 – Compressive Strength of Concrete Cylinders Cast in Place in Cylindrical Molds
- ASTM C900 – Pullout Strength of Hardened Concrete
- ASTM C928 – Packaged, Dry, Rapid-Hardening Cementitious Materials for Concrete Repairs
- ASTM C936 – Solid Concrete Interlocking Paving Units
- ASTM C937 – Grout Fluidifier for Preplaced-Aggregate Concrete
- ASTM C942 – Compressive Strength of Grouts for Preplaced-Aggregate Concrete in the Laboratory
- ASTM C954 – Steel Drill Screws for the Application of Gypsum Panel Products or Metal Plaster Bases to Steel Studs from 0.033 in. (0.84 mm) to 0.112 in. (2.84 mm) in Thickness
- ASTM C985 – Nonreinforced Concrete Specified Strength Culvert, Storm Drain, and Sewer Pipe
- ASTM C989 – Slag Cement for Use in Concrete and Mortars
- ASTM C1006 – Splitting Tensile Strength of Masonry Units
- ASTM C1012 – Length Change of Hydraulic-Cement Mortars Exposed to a Sulfate Solution
- ASTM C1017 – Chemical Admixtures for Use in Producing Flowing Concrete
- ASTM C1019 – Sampling and Testing Grout for Masonry
- ASTM C1028 – Determining the Static Coefficient of Friction of Ceramic Tile and Other Like Surfaces by the Horizontal Dynamometer Pull-Meter Method
- ASTM C1038 – Expansion of Hydraulic Cement Mortar Bars Stored in Water
- ASTM C1040 – In-Place Density of Unhardened and Hardened Concrete, Including Roller Compacted Concrete, By Nuclear Methods
- ASTM C1064 – Temperature of Freshly Mixed Hydraulic-Cement Concrete
- ASTM C1077 – Agencies Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Testing Agency Evaluation
- ASTM C1093 – Accreditation of Testing Agencies for Masonry
- ASTM C1105 – Length Change of Concrete Due to Alkali-Carbonate Rock Reaction
- ASTM C1107 – Packaged Dry, Hydraulic-Cement Grout (Nonshrink)
- ASTM C1116 – Fiber-Reinforced Concrete
- ASTM C1140 – Preparing and Testing Specimens from Shotcrete Test Panels
- ASTM C1152 – Acid-Soluble Chloride in Mortar and Concrete
- ASTM C1157 – Hydraulic Cement
- ASTM C1218 – Water-Soluble Chloride in Mortar and Concrete
- ASTM C1222 – Evaluation of Laboratories Testing Hydraulic Cement
- ASTM C1231 – Use of Unbonded Caps in Determination of Compressive Strength of Hardened Cylindrical Concrete Specimens
- ASTM C1240 – Silica Fume Used in Cementitious Mixtures
- ASTM C1260 – Potential Alkali Reactivity of Aggregates (Mortar-Bar Method)
- ASTM C1262 – Evaluating the Freeze-Thaw Durability of Dry-Cast Segmental Retaining Wall Units and Related Concrete Units
- ASTM C1293 – Determination of Length Change of Concrete Due to Alkali-Silica Reaction
- ASTM C1314 – Compressive Strength of Masonry Prisms
- ASTM C1319 – Concrete Grid Paving Units
- ASTM C1329 – Mortar Cement
- ASTM C1372 – Dry-Cast Segmental Retaining Wall Units
- ASTM C1385 – Sampling Materials for Shotcrete
- ASTM C1399 – Obtaining Average Residual-Strength of Fiber-Reinforced Concrete
- ASTM C1437 – Flow of Hydraulic Cement Mortar
- ASTM C1491 – Concrete Roof Pavers
- ASTM C1506 – Water Retention of Hydraulic Cement-Based Mortars and Plasters
- ASTM C1513 – Steel Tapping Screws for Cold-Formed Steel Framing Connections
- ASTM C1524 – Water-Extractable Chloride in Aggregate (Soxhlet Method)
- ASTM C1556 – Determining the Apparent Chloride Diffusion Coefficient of Cementitious Mixtures by Bulk Diffusion
- ASTM C1567 – Determining the Potential Alkali-Silica Reactivity of Combinations of Cementitious Materials and Aggregate (Accelerated Mortar-Bar Method)
- ASTM C1585 – Measurement of Rate of Absorption of Water by Hydraulic-Cement Concretes
- ASTM C1586 – Quality Assurance of Mortars
- ASTM C1604 – Obtaining and Testing Drilled Cores of Shotcrete
- ASTM C1611 – Slump Flow of Self-Consolidating Concrete
- ASTM C1645 – Freeze-thaw and De-icing Salt Durability of Solid Concrete Interlocking Paving Units
- ASTM C1670 – Adhered Manufactured Stone Masonry Veneer Units
- ASTM C1688 – Density and Void Content of Freshly Mixed Pervious Concrete
- ASTM C1697 – Blended Supplementary Cementitious Materials
- ASTM C1704 – Sampling and Testing Structural Cementitious Panels
- ASTM C1714 – Preblended Dry Mortar Mix for Unit Masonry
- ASTM C1754 – Density and Void Content of Hardened Pervious Concrete
- ASTM D75 – Sampling Aggregates
- ASTM D127 – Drop Melting Point of Petroleum Wax, Including Petrolatum
- ASTM D143 – Small Clear Specimens of Timber
- ASTM D198 – Static Tests of Lumber in Structural Sizes
- ASTM D422 – Particle-Size Analysis of Soils
- ASTM D638 – Tensile Properties of Plastics
- ASTM D695 – Compressive Properties of Rigid Plastics
- ASTM D698 – Laboratory Compaction Characteristics of Soil Using Standard Effort
- ASTM D854 – Specific Gravity of Soil Solids by Water Pycnometer
- ASTM D891 – Specific Gravity, Apparent, of Liquid Industrial Chemicals
- ASTM D1037 – Evaluating Properties of Wood-Base Fiber and Particle Panel Materials
- ASTM D1140 – Determining the Amount of Material Finer than 75-μm (No. 200) Sieve in Soils by Washing
- ASTM D1143 – Deep Foundation Elements Under Static Axial Compressive Load
- ASTM D1557 – Laboratory Compaction Characteristics of Soil Using Modified Effort
- ASTM D1761 – Mechanical Fasteners in Wood and Wood-Based Materials
- ASTM D1883 – California Bearing Ratio (CBR) of Laboratory-Compacted Soils
- ASTM D2166 – Unconfined Compressive Strength of Cohesive Soil
- ASTM D2216 – Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass
- ASTM D2395 – Density and Specific Gravity (Relative Density) of Wood and Wood-Based Materials
- ASTM D2487 – Classification of Soils for Engineering Purposes (Unified Soil Classification System)
- ASTM D2915 – Sampling and Data-Analysis for Structural Wood and Wood-Based Products
- ASTM D2936 – Direct Tensile Strength of Intact Rock Core Specimens
- ASTM D2938 – Unconfined Compressive Strength of Intact Rock Core Specimens
- ASTM D2950 – Density of Bituminous Concrete in Place by Nuclear Methods
- ASTM D2974 – Moisture, Ash, and Organic Matter of Peat and Other Organic Soils
- ASTM D3080 – Direct Shear Test of Soils Under Consolidated Drained Conditions
- ASTM D3142 – Specific Gravity, API Gravity, or Density of Cutback Asphalts by Hydrometer Method
- ASTM D3154 – Average Velocity in a Duct (Pitot Tube Method)
- ASTM D3666 – Minimum Requirements for Agencies Testing and Inspecting Road and Paving Materials
- ASTM D3689 – Deep Foundations Under Static Axial Tensile Load
- ASTM D3740 – Minimum Requirements for Agencies Engaged in Testing and/or Inspection of Soil and Rock as Used in Engineering Design and Construction
- ASTM D3966 – Deep Foundations Under Lateral Load
- ASTM D4221 – Dispersive Characteristics of Clay Soil by Double Hydrometer
- ASTM D4318 – Liquid Limit, Plastic Limit, and Plasticity Index of Soils
- ASTM D4442 – Direct Moisture Content Measurement of Wood and Wood-Based Materials
- ASTM D4525 – Permeability of Rocks by Flowing Air
- ASTM D4630 – Determining Transmissivity and Storage Coefficient of Low-Permeability Rocks by In Situ Measurements Using the Constant Head Injection Test
- ASTM D4761 – Mechanical Properties of Lumber and Wood-Based Structural Materials
- ASTM D4791 – Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate
- ASTM D4832 – Preparation and Testing of Controlled Low Strength Material (CLSM) Test Cylinders
- ASTM D4933 – Moisture Conditioning of Wood and Wood-Based Materials
- ASTM D4972 – pH of Soils
- ASTM D5268 – Topsoil Used for Landscaping and Construction Purposes
- ASTM D5361 – Sampling Compacted Asphalt Mixtures for Laboratory Testing
- ASTM D5370 – Pozzolanic Blended Materials in Construction Applications
- ASTM D5821 – Determining the Percentage of Fractured Particles in Coarse Aggregate
- ASTM D5971 – Sampling Freshly Mixed Controlled Low-Strength Material
- ASTM D6913 – Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis
- ASTM D6938 – In-Place Density and Water Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth)
- ASTM D6951 – Use of the Dynamic Cone Penetrometer in Shallow Pavement Applications
- ASTM D7031 – Evaluating Mechanical and Physical Properties of Wood-Plastic Composite Products
- ASTM D7032 – Establishing Performance Ratings for Wood-Plastic Composite and Plastic Lumber Deck Boards, Stair Treads, Guards, and Handrails
- ASTM D7928 – Particle-Size Distribution (Gradation) of Fine-Grained Soils Using the Sedimentation (Hydrometer) Analysis
- ASTM E8 – Tension Testing of Metallic Materials
- ASTM E9 – Compression Testing of Metallic Materials at Room Temperature
- ASTM E11 – Woven Wire Test Sieve Cloth and Test Sieves
- ASTM E18 – Rockwell Hardness of Metallic Materials
- ASTM E70 – pH of Aqueous Solutions With the Glass Electrode
- ASTM E72 – Conducting Strength Tests of Panels for Building Construction
- ASTM E73 – Static Load Testing of Truss Assemblies
- ASTM E96 – Water Vapor Transmission of Materials
- ASTM E100 – ASTM Hydrometers
- ASTM E114 – Ultrasonic Pulse-Echo Straight-Beam Contact Testing
- ASTM E164 – Contact Ultrasonic Testing of Weldments
- ASTM E165 – Liquid Penetrant Testing for General Industry
- ASTM E329 – Agencies Engaged in Construction Inspection, Testing, or Special Inspection
- ASTM E330 – Structural Performance of Exterior Windows, Doors, Skylights and Curtain Walls by Uniform Static Air Pressure Difference
- ASTM E331 – Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Uniform Static Air Pressure Difference
- ASTM E455 – Static Load Testing of Framed Floor or Roof Diaphragm Constructions for Buildings
- ASTM E488 – Strength of Anchors in Concrete Elements
- ASTM E518 – Flexural Bond Strength of Masonry
- ASTM E519 – Diagonal Tension (Shear) in Masonry Assemblages
- ASTM E543 – Agencies Performing Nondestructive Testing
- ASTM E564 – Static Load Test for Shear Resistance of Framed Walls for Buildings
- ASTM E605 – Thickness and Density of Sprayed Fire-Resistive Material (SFRM) Applied to Structural Members
- ASTM E661 – Performance of Wood and Wood-Based Floor and Roof Sheathing Under Concentrated Static and Impact Loads
- ASTM E709 – Magnetic Particle Testing
- ASTM E736 – Cohesion/Adhesion of Sprayed Fire-Resistive Materials Applied to Structural Members
- ASTM E761 – Compressive Strength of Sprayed Fire-Resistive Material Applied to Structural Members
- ASTM E1155 – Determining FF Floor Flatness and FL Floor Levelness Numbers
- ASTM E1190 – Strength of Power-Actuated Fasteners Installed in Structural Members
- ASTM E1252 – General Techniques for Obtaining Infrared Spectra for Qualitative Analysis
- ASTM E1417 – Liquid Penetrant Testing
- ASTM E1444 – Magnetic Particle Testing
- ASTM E1513 – Application of Sprayed Fire-Resistive Materials (SFRMs)
- ASTM E1803 – Determining Strength Capacities of Structural Insulated Panels
- ASTM E2322 – Conducting Transverse and Concentrated Load Tests on Panels used in Floor and Roof Construction
- ASTM F606 – Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets
- ASTM F1470 – Fastener Sampling for Specified Mechanical Properties and Performance Inspection
- ASTM F1575 – Determining Bending Yield Moment of Nails
- ASTM F1869 – Measuring Moisture Vapor Emission Rate of Concrete Subfloor Using Anhydrous Calcium Chloride
- ASTM G85 – Modified Salt Spray (Fog) Testing
- ASTM G109 – Determining Effects of Chemical Admixtures on Corrosion of Embedded Steel Reinforcement in Concrete Exposed to Chloride Environments
- BS EN 480-10 – Admixtures for Concrete, Mortar and Grout
- CRD C48 – Water Permeability of Concrete
- ICC-ES AC01 – Expansion Anchors in Masonry Elements
- ICC-ES AC04 – Sandwich Panels
- ICC-ES AC13 – Joist Hangers and Similar Devices
- ICC-ES AC14 – Prefabricated Wood I-joists
- ICC-ES AC16 – Plastic Glazed Skylights
- ICC-ES AC17 – Glass Glazed Unit Skylights and Sloped Glass Glazing
- ICC-ES AC25 – Metal Composite Material (MCM)
- ICC-ES AC32 – Concrete with Synthetic Fibers
- ICC-ES AC37 – Vinyl Siding
- ICC-ES AC43 – Steel Deck Roof and Floor Systems
- ICC-ES AC51 – Adhered Manufactured Stone Masonry Veneer
- ICC-ES AC58 – Adhesive Anchors in Masonry Elements
- ICC-ES AC70 – Power-actuated Fasteners Driven into Concrete, Steel and Masonry Elements
- ICC-ES AC90 – Fiber Cement Siding Used as Exterior Wall Siding
- ICC-ES AC100 – Air-conditioning Equipment Pads
- ICC-ES AC106 – Predrilled Fasteners (Screw Anchors) in Masonry
- ICC-ES AC116 – Nails
- ICC-ES AC118 – Tapping Screw Fasteners Used in Steel-to-steel Connections
- ICC-ES AC124 – Rim Board Products
- ICC-ES AC125 – Concrete and Reinforced and Unreinforced Masonry Strengthening Using Externally Bonded Fiber-reinforced Polymer (FRP) Composite Systems
- ICC-ES AC129 – Steel Moment Frame Connection Systems
- ICC-ES AC130 – Prefabricated Wood Shear Panels
- ICC-ES AC132 – Attic Vents
- ICC-ES AC133 – Mechanical Splice Systems for Steel Reinforcing Bars
- ICC-ES AC138 – Prefabricated Wall Panels Using Wood I-studs
- ICC-ES AC151 – Fixed-height, Low-profile, Raised Floor Systems
- ICC-ES AC170 – Shear Reinforcement Devices in Structural Concrete
- ICC-ES AC174 – Deck Board Span Ratings and Guardrail Systems (Guards and Handrails)
- ICC-ES AC175 – Raised Floor Systems over Concealed Spaces
- ICC-ES AC182 – Wood Structural Panels
- ICC-ES AC193 – Mechanical Anchors in Concrete Elements
- ICC-ES AC202 – Wood-based Studs
- ICC-ES AC210 – Patio Covers with PVC Plastic Components
- ICC-ES AC213 – Glass Shear Walls and Diaphragms for Patio Covers
- ICC-ES AC214 – Sandwich Panels with Metal Skins and a Foamed-in-place Foam-plastic Insulated Core
- ICC-ES AC233 – Dowel-type Threaded Fasteners Used in Wood
- ICC-ES AC244 – Exterior Doors and Windows
- ICC-ES AC273 – Handrails and Guards
- ICC-ES AC300 – Access Floors
- ICC-ES AC304 – Inspections and Inspection Agencies
- ICC-ES AC308 – Post-installed Adhesive Anchors in Concrete Elements
- ICC-ES AC317 – Metal Connectors Used to Attach Wood and Composite Decking Material
- ICC-ES AC318 – Structural Cementitious Floor and Roof Sheathing Panels
- ICC-ES AC319 – Horizontal Diaphragms
- ICC-ES AC320 – Fiber-reinforced Polymer Composite or Unreinforced Polymer Connectors Anchored in Concrete
- ICC-ES AC322 – Prefabricated, Cold-formed Steel, Lateral-force-resisting Vertical Assemblies
- ICC-ES AC323 – Reinforcement of Openings in Shear Walls with Steel Brackets
- ICC-ES AC331 – Smoke and Heat Vents
- ICC-ES AC333 – Injection Molded Composite Material (IMCM) Wall Panels
- ICC-ES AC335 – Adjustable Steel Columns
- ICC-ES AC340 – Patio Covers
- ICC-ES AC344 – Riveted Connections of Cold-formed Steel Structural Members Using Self-piercing Rivets
- ICC-ES AC345 – Stay-in-place Forms for Post and Beam Concrete Walls
- ICC-ES AC347 – Headed Deformed Bars for use with I-codes
- ICC-ES AC353 – Stay-in-place, Foam Plastic Insulating Concrete Form (ICF) Systems for Solid Concrete Walls
- ICC-ES AC358 – Helical Pile Systems and Devices
- ICC-ES AC367 – Fiber-reinforced Cement Sheet Structural Floor Sheathing
- ICC-ES AC369 – Steel Cable Assemblies
- ICC-ES AC376 – Reinforced Cementitious Sheets Used as Wall and Ceiling Sheathing and Floor Underlayment
- ICC-ES AC377 – Spray-applied Foam Plastic Insulation
- ICC-ES AC379 – Fastening Systems for Use with Re-entrant-type Steel Deck Panel Profiles
- ICC-ES AC390 – Wall Panels with a Welded Steel Perimeter Frame Used in Agricultural Storage Structures
- ICC-ES AC391 – Continuous Rod Tie-down Runs and Continuous Rod Tie-down Systems Used to Resist Wind Uplift
- ICC-ES AC394 – Structural Capacity of Components of Work Cages for Wind Turbine Towers
- ICC-ES AC395 – Headed Shear Stud Reinforcement Assemblies for Concrete Slabs or Footings
- ICC-ES AC408 – Structural Concrete with Lightweight Synthetic Particles
- ICC-ES AC425 – Cold-Formed Steel Structural Beams Acting Compositely with Cast-in-place Concrete Slabs
- ICC-ES AC437 – Blind Bolts in Structural Steel Connections
- ICC-ES AC449 – Tension-controlled Open Web Steel Joists
- ICC-ES AC509 – 3D Automated Construction Technology for 3D Concrete Walls
- ICC-ES AC520 – CO2 Concrete-Based Concrete Masonry Units
Related Standards
Other inspection standards, test methods, specifications and acceptance criteria:
- AASHTO M152 – Flow Table for Use in Tests of Hydraulic Cement
- AASHTO M205 – Molds for Forming Concrete Test Cylinders Vertically
- AASHTO M231 – Weighing Devices Used in the Testing of Materials
- AASHTO M235 – Epoxy Resin Adhesives
- AASHTO M295 – Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete
- AASHTO M327 – Processing Additions for Use in the Manufacture of Hydraulic Cements
- AASHTO R71 – Sampling and Amount of Testing of Hydraulic Cement
- AASHTO R76 – Reducing Samples of Aggregate to Testing Size
- AASHTO R90 – Sampling Aggregate Products
- AASHTO T65 – Mass (Weight) of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
- AASHTO T107 – Autoclave Expansion of Hydraulic Cement
- AASHTO T129 – Amount of Water Required for Normal Consistency of Hydraulic Cement Paste
- AASHTO T133 – Density of Hydraulic Cement
- AASHTO T137 – Air Content of Hydraulic Cement Mortar
- AASHTO T154 – Time of Setting of Hydraulic Cement Paste by Gillmore Needles
- AASHTO T155 – Water Retention by Liquid Membrane-Forming Curing Compounds for Concrete
- AASHTO T160 – Length Change of Hardened Hydraulic Cement Mortar and Concrete
- AASHTO T178 – Portland Cement Content of Hardened Hydraulic-Cement Concrete
- AASHTO T185 – Early Stiffening of Hydraulic Cement (Mortar Method)
- AASHTO T186 – Early Stiffening of Hydraulic Cement (Paste Method)
- AASHTO T192 – Fineness of Hydraulic Cement by the 45-μm (No. 325) Sieve
- AASHTO T244 – Mechanical Testing of Steel Products
- AASHTO T259 – Resistance of Concrete to Chloride Ion Penetration
- AASHTO T277 – Electrical Indication of Concrete’s Ability to Resist Chloride Ion Penetration
- AASHTO T295 – Specific Gravity or API Gravity of Liquid Asphalts by Hydrometer Method
- AASHTO T365 – Quantifying Calcium Oxychloride Amounts in Cement Pastes Exposed to Deicing Salts
- ASTM A90 – Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
- ASTM A247 – Evaluating the Microstructure of Graphite in Iron Castings
- ASTM A255 – Determining Hardenability of Steel
- ASTM A262 – Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels
- ASTM A307 – Carbon Steel Bolts, Studs, and Threaded Rod 60 000 PSI Tensile Strength
- ASTM A931 – Tension Testing of Wire Ropes and Strand
- ASTM B499 – Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals
- ASTM B659 – Measuring Thickness of Metallic and Inorganic Coatings
- ASTM C25 – Chemical Analysis of Limestone, Quicklime, and Hydrated Lime
- ASTM C123 – Lightweight Particles in Aggregate
- ASTM C125 – Terminology Relating to Concrete and Concrete Aggregates
- ASTM C135 – True Specific Gravity of Refractory Materials by Water Immersion
- ASTM C156 – Water Loss (from a Mortar Specimen) Through Liquid Membrane-Forming Curing Compounds for Concrete
- ASTM C170 – Compressive Strength of Dimension Stone
- ASTM C289 – Potential Alkali-Silica Reactivity of Aggregates (Chemical Method)
- ASTM C341 – Preparation and Conditioning of Cast, Drilled, or Sawed Specimens of Hydraulic-Cement Mortar and Concrete Used for Length Change Measurements
- ASTM C441 – Effectiveness of Pozzolans or Ground Blast-Furnace Slag in Preventing Excessive Expansion of Concrete Due to the Alkali-Silica Reaction
- ASTM C469 – Static Modulus of Elasticity and Poisson’s Ratio of Concrete in Compression
- ASTM C490 – Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete
- ASTM C604 – True Specific Gravity of Refractory Materials by Gas-Comparison Pycnometer
- ASTM C642 – Density, Absorption, and Voids in Hardened Concrete
- ASTM C670 – Preparing Precision and Bias Statements for Test Methods for Construction Materials
- ASTM C672 – Scaling Resistance of Concrete Surfaces Exposed to Deicing Chemicals
- ASTM C736 – Extension-Recovery and Adhesion of Latex Sealants
- ASTM C778 – Standard Sand
- ASTM C807 – Time of Setting of Hydraulic Cement Mortar by Modified Vicat Needle
- ASTM C827 – Change in Height at Early Ages of Cylindrical Specimens of Cementitious Mixtures
- ASTM C881 – Epoxy-Resin-Base Bonding Systems for Concrete
- ASTM C882 – Bond Strength of Epoxy-Resin Systems Used With Concrete By Slant Shear
- ASTM C884 – Thermal Compatibility Between Concrete and an Epoxy-Resin Overlay
- ASTM C939 – Flow of Grout for Preplaced-Aggregate Concrete (Flow Cone Method)
- ASTM C953 – Time of Setting of Grouts for Preplaced-Aggregate Concrete in the Laboratory
- ASTM C1084 – Portland-Cement Content of Hardened Hydraulic-Cement Concrete
- ASTM C1090 – Measuring Changes in Height of Cylindrical Specimens of Hydraulic-Cement Grout
- ASTM C1138 – Abrasion Resistance of Concrete (Underwater Method)
- ASTM C1202 – Electrical Indication of Concrete’s Ability to Resist Chloride Ion Penetration
- ASTM C1364 – Architectural Cast Stone
- ASTM C1550 – Flexural Toughness of Fiber Reinforced Concrete (Using Centrally Loaded Round Panel)
- ASTM C1580 – Water-Soluble Sulfate in Soil
- ASTM C1602 – Mixing Water Used in the Production of Hydraulic Cement Concrete
- ASTM C1603 – Measurement of Solids in Water
- ASTM D522 – Mandrel Bend Test of Attached Organic Coatings
- ASTM D523 – Specular Gloss
- ASTM D570 – Water Absorption of Plastics
- ASTM D610 – Evaluating Degree of Rusting on Painted Steel Surfaces
- ASTM D618 – Conditioning Plastics for Testing
- ASTM D648 – Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position
- ASTM D714 – Evaluating Degree of Blistering of Paints
- ASTM D823 – Producing Films of Uniform Thickness of Paint, Coatings and Related Products on Test Panels
- ASTM D883 – Standard Terminology Relating to Plastics
- ASTM D907 – Standard Terminology of Adhesives
- ASTM D1193 – Reagent Water
- ASTM D1293 – pH of Water
- ASTM D1426 – Ammonia Nitrogen In Water
- ASTM D1654 – Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments
- ASTM D1734 – Making Cementitious Panels for Testing Coatings
- ASTM D2444 – Determination of the Impact Resistance of Thermoplastic Pipe and Fittings by Means of a Tup (Falling Weight)
- ASTM D2556 – Apparent Viscosity of Adhesives Having Shear-Rate-Dependent Flow Properties Using Rotational Viscometry
- ASTM D2621 – Infrared Identification of Vehicle Solids From Solvent-Reducible Paints
- ASTM D3359 – Rating Adhesion by Tape Test
- ASTM D3924 – Standard Environment for Conditioning and Testing Paint, Varnish, Lacquer, and Related Materials
- ASTM D4718 – Correction of Unit Weight and Water Content for Soils Containing Oversize Particles
- ASTM D5456 – Evaluation of Structural Composite Lumber Products
- ASTM D5519 – Particle Size Analysis of Natural and Man-Made Riprap Materials
- ASTM D5947 – Physical Dimensions of Solid Plastics Specimens
- ASTM D6490 – Water Vapor Transmission of NonFilm Forming Treatments Used on Cementitious Panels
- ASTM D7033 – Establishing Design Capacities for Oriented Strand Board (OSB) Wood-Based Structural-Use Panels
- ASTM E1 – ASTM Liquid-in-Glass Thermometers
- ASTM E10 – Brinell Hardness of Metallic Materials
- ASTM E21 – Elevated Temperature Tension Tests of Metallic Materials
- ASTM E23 – Notched Bar Impact Testing of Metallic Materials
- ASTM E45 – Determining the Inclusion Content of Steel
- ASTM E77 – Inspection and Verification of Thermometers
- ASTM E92 – Vickers Hardness and Knoop Hardness of Metallic Materials
- ASTM E104 – Maintaining Constant Relative Humidity by Means of Aqueous Solutions
- ASTM E112 – Determining Average Grain Size
- ASTM E290 – Bend Testing of Material for Ductility
- ASTM E308 – Computing the Colors of Objects by Using the CIE System
- ASTM E384 – Knoop and Vickers Hardness of Materials
- ASTM E399 – Linear-Elastic Plane-Strain Fracture Toughness of Metallic Materials
- ASTM E608 – Mineral-Insulated, Metal-Sheathed Base Metal Thermocouples
- ASTM E691 – Conducting an Interlaboratory Study to Determine the Precision of a Test Method
- ASTM E1077 – Estimating the Depth of Decarburization of Steel Specimens
- ASTM E1137 – Industrial Platinum Resistance Thermometers
- ASTM E1730 – Rigid Foam for Use in Structural Sandwich Panel Cores
- ASTM E1820 – Measurement of Fracture Toughness
- ASTM E2174 – On-Site Inspection of Installed Firestop Systems
- ASTM E2393 – On-Site Inspection of Installed Fire Resistive Joint Systems and Perimeter Fire Barriers
- ASTM F3043 – “Twist Off” Type Tension Control Structural Bolt/Nut/Washer Assemblies, Alloy Steel, Heat Treated, 200 ksi Minimum Tensile Strength
- ASTM F3125 – High Strength Structural Bolts and Assemblies, Steel and Alloy Steel, Heat Treated, Inch Dimensions 120 ksi and 150 ksi Minimum Tensile Strength, and Metric Dimensions 830 MPa and 1040 MPa Minimum Tensile Strength
- ASTM G28 – Detecting Susceptibility to Intergranular Corrosion in Wrought, Nickel-Rich, Chromium-Bearing Alloys
- ASTM G48 – Pitting and Crevice Corrosion Resistance of Stainless Steels and Related Alloys by Use of Ferric Chloride Solution
- ASTM G51 – Measuring pH of Soil for Use in Corrosion Testing
- ASTM G87 – Conducting Moist SO2 Tests
- BS EN 1767 – Products and systems for the protection and repair of concrete structures. Test methods. Infrared analysis
- BS EN 10247 – Micrographic Examination of the Non-Metallic Inclusion Content of Steels Using Standard Pictures
- BS EN 10346 – Continuously Hot-Dip Coated Steel Flat Products for Cold Forming. Technical Delivery Conditions