Related Standards

Related Standards

Applied Testing & Geosciences, LLC is accredited for a comprehensive list of inspection standards, test methods, specifications and acceptance criteria.

Other inspection standards, test methods, specifications and acceptance criteria:

• AASHTO M152 – Flow Table for Use in Tests of Hydraulic Cement
• AASHTO M205 – Molds for Forming Concrete Test Cylinders Vertically
• AASHTO M231 – Weighing Devices Used in the Testing of Materials
• AASHTO M235 – Epoxy Resin Adhesives
• AASHTO M295 – Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete
• AASHTO M306 – Drainage, Sewer, Utility, and Related Castings
• AASHTO M327 – Processing Additions for Use in the Manufacture of Hydraulic Cements
• AASHTO R71 – Sampling and Amount of Testing of Hydraulic Cement
• AASHTO R76 – Reducing Samples of Aggregate to Testing Size
• AASHTO R90 – Sampling Aggregate Products
• AASHTO T65 – Mass (Weight) of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
• AASHTO T107 – Autoclave Expansion of Hydraulic Cement
• AASHTO T129 – Amount of Water Required for Normal Consistency of Hydraulic Cement Paste
• AASHTO T133 – Density of Hydraulic Cement
• AASHTO T137 – Air Content of Hydraulic Cement Mortar
• AASHTO T154 – Time of Setting of Hydraulic Cement Paste by Gillmore Needles
• AASHTO T155 – Water Retention by Liquid Membrane-Forming Curing Compounds for Concrete
• AASHTO T160 – Length Change of Hardened Hydraulic Cement Mortar and Concrete
• AASHTO T178 – Portland Cement Content of Hardened Hydraulic-Cement Concrete
• AASHTO T185 – Early Stiffening of Hydraulic Cement (Mortar Method)
• AASHTO T186 – Early Stiffening of Hydraulic Cement (Paste Method)
• AASHTO T192 – Fineness of Hydraulic Cement by the 45-μm (No. 325) Sieve
• AASHTO T244 – Mechanical Testing of Steel Products
• AASHTO T259 – Resistance of Concrete to Chloride Ion Penetration
• AASHTO T277 – Electrical Indication of Concrete’s Ability to Resist Chloride Ion Penetration
• AASHTO T295 – Specific Gravity or API Gravity of Liquid Asphalts by Hydrometer Method
• AASHTO T365 – Quantifying Calcium Oxychloride Amounts in Cement Pastes Exposed to Deicing Salts
• ASTM A90 – Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
• ASTM A247 – Evaluating the Microstructure of Graphite in Iron Castings
• ASTM A255 – Determining Hardenability of Steel
• ASTM A262 – Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels
• ASTM A307 – Carbon Steel Bolts, Studs, and Threaded Rod 60 000 PSI Tensile Strength
• ASTM A325 – Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength
• ASTM A325M – Structural Bolts, Steel, Heat Treated 830 MPa Minimum Tensile Strength (Metric)
• ASTM A354 – Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded Fasteners
• ASTM A394 – Steel Transmission Tower Bolts, Zinc-Coated and Bare
• ASTM A449 – Hex Cap Screws, Bolts and Studs, Steel, Heat Treated, 120/105/90 ksi Minimum Tensile Strength, General Use
• ASTM A489 – Carbon Steel Eyebolts
• ASTM A490 – Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength
• ASTM A490M – High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints (Metric)
• ASTM A563 – Carbon and Alloy Steel Nuts (Inch and Metric)
• ASTM A563M – Carbon and Alloy Steel Nuts (Metric)
• ASTM A574 – Alloy Steel Socket-Head Cap Screws
• ASTM A574M – Alloy Steel Socket-Head Cap Screws (Metric)
• ASTM A687 – High-Strength Nonheaded Steel Bolts and Studs
• ASTM A931 – Tension Testing of Wire Ropes and Strand
• ASTM B499 – Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals
• ASTM B659 – Measuring Thickness of Metallic and Inorganic Coatings
• ASTM C4 – Clay Drain Tile and Perforated Clay Drain Tile
• ASTM C5 – Quicklime for Structural Purposes
• ASTM C10 – Natural Cement
• ASTM C11 – Gypsum and Related Building Materials and Systems
• ASTM C12 – Practice Installing Vitrified Clay Pipe Lines
• ASTM C14 – Nonreinforced Concrete Sewer, Storm Drain, and Culvert Pipe
• ASTM C14M – Nonreinforced Concrete Sewer, Storm Drain, and Culvert Pipe (Metric)
• ASTM C22 – Gypsum
• ASTM C25 – Chemical Analysis of Limestone, Quicklime, and Hydrated Lime
• ASTM C28 – Gypsum Plasters
• ASTM C32 – Sewer and Manhole Brick (Made From Clay or Shale)
• ASTM C34 – Structural Clay Loadbearing Wall Tile
• ASTM C35 – Inorganic Aggregates for Use in Gypsum Plaster
• ASTM C36 – Gypsum Wallboard
• ASTM C37 – Gypsum Lath
• ASTM C43 – Terminology of Structural Clay Products
• ASTM C51 – Lime and Limestone (as Used by the Industry)
• ASTM C56 – Structural Clay Nonloadbearing Tile
• ASTM C61 – Gypsum Keene’s Cement
• ASTM C76 – Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe
• ASTM C76M – Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe (Metric)
• ASTM C79 – Gypsum Sheathing Board
• ASTM C115 – Fineness of Portland Cement by the Turbidimeter
• ASTM C118 – Concrete Pipe for Irrigation or Drainage
• ASTM C118M – Concrete Pipe for Irrigation or Drainage (Metric)
• ASTM C123 – Lightweight Particles in Aggregate
• ASTM C125 – Terminology Relating to Concrete and Concrete Aggregates
• ASTM C126 – Ceramic Glazed Structural Clay Facing Tile, Facing Brick, and Solid Masonry Units
• ASTM C135 – True Specific Gravity of Refractory Materials by Water Immersion
• ASTM C139 – Concrete Masonry Units for Construction of Catch Basins and Manholes
• ASTM C141 – Hydrated Hydraulic Lime for Structural Purposes
• ASTM C144 – Aggregate for Masonry Mortar
• ASTM C156 – Water Loss (from a Mortar Specimen) Through Liquid Membrane-Forming Curing Compounds for Concrete
• ASTM C159 – Vitrified Clay Filter Blocks
• ASTM C170 – Compressive Strength of Dimension Stone
• ASTM C171 – Sheet Materials for Curing Concrete
• ASTM C184 – Fineness of Hydraulic Cement by the 150-[mu]m (No. 100) and 75-[mu]m (No. 200) Sieves
• ASTM C186 – Heat of Hydration of Hydraulic Cement
• ASTM C206 – Finishing Hydrated Lime
• ASTM C212 – Structural Clay Facing Tile
• ASTM C220 – Flat Asbestos-Cement Sheets
• ASTM C221 – Corrugated Asbestos-Cement Sheets
• ASTM C222 – Asbestos-Cement Roofing Shingles
• ASTM C223 – Asbestos-Cement Siding
• ASTM C226 – Air-Entraining Additions for Use in the Manufacture of Air-Entraining Hydraulic Cement
• ASTM C243 – Bleeding of Cement Pastes and Mortars
• ASTM C279 – Chemical-Resistant Masonry Units
• ASTM C289 – Potential Alkali-Silica Reactivity of Aggregates (Chemical Method)
• ASTM C294 – Constituents of Concrete Aggregates
• ASTM C296 – Asbestos-Cement Pressure Pipe
• ASTM C301 – Vitrified Clay Pipe
• ASTM C309 – Liquid Membrane-Forming Compounds for Curing Concrete
• ASTM C315 – Clay Flue Liners and Chimney Pots
• ASTM C317 – Gypsum Concrete
• ASTM C318 – Gypsum Formboard
• ASTM C330 – Lightweight Aggregates for Structural Concrete
• ASTM C331 – Lightweight Aggregates for Concrete Masonry Units
• ASTM C332 – Lightweight Aggregates for Insulating Concrete
• ASTM C341 – Preparation and Conditioning of Cast, Drilled, or Sawed Specimens of Hydraulic-Cement Mortar and Concrete Used for Length Change Measurements
• ASTM C361 – Reinforced Concrete Low-Head Pressure Pipe
• ASTM C361M – Reinforced Concrete Low-Head Pressure Pipe (Metric)
• ASTM C400 – Quicklime and Hydrated Lime for Neutralization of Waste Acid
• ASTM C410 – Industrial Floor Brick
• ASTM C412 – Concrete Drain Tile
• ASTM C412M – Concrete Drain Tile (Metric)
• ASTM C418 – Abrasion Resistance of Concrete by Sandblasting
• ASTM C425 – Compression Joints for Vitrified Clay Pipe and Fittings
• ASTM C428 – Asbestos-Cement Nonpressure Sewer Pipe
• ASTM C441 – Effectiveness of Pozzolans or Ground Blast-Furnace Slag in Preventing Excessive Expansion of Concrete Due to the Alkali-Silica Reaction
• ASTM C442 – Gypsum Backing Board, Gypsum Coreboard, and Gypsum Shaftliner Board
• ASTM C443 – Joints for Concrete Pipe and Manholes, Using Rubber Gaskets
• ASTM C443M – Joints for Concrete Pipe and Manholes, Using Rubber Gaskets (Metric)
• ASTM C444 – Perforated Concrete Pipe
• ASTM C444M – Perforated Concrete Pipe (Metric)
• ASTM C458 – Organic Fiber Content of Asbestos-Cement Products
• ASTM C459 – Asbestos-Cement Flat Products
• ASTM C469 – Static Modulus of Elasticity and Poisson’s Ratio of Concrete in Compression
• ASTM C471M – Chemical Analysis of Gypsum and Gypsum Products (Metric)
• ASTM C473 – Physical Testing of Gypsum Panel Products
• ASTM C474 – Joint Treatment Materials for Gypsum Board Construction
• ASTM C475 – Joint Compound and Joint Tape for Finishing Gypsum Board
• ASTM C478 – Circular Precast Reinforced Concrete Manhole Sections
• ASTM C478M – Circular Precast Reinforced Concrete Manhole Sections (Metric)
• ASTM C479 – Vitrified Clay Liner Plates
• ASTM C490 – Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete
• ASTM C497M – Concrete Pipe, Concrete Box Sections, Manhole Sections, or Tile (Metric)
• ASTM C498 – Perforated Clay Drain Tile
• ASTM C500 – Asbestos-Cement Pipe
• ASTM C505 – Nonreinforced Concrete Irrigation Pipe with Rubber Gasket Joints
• ASTM C505M – Nonreinforced Concrete Irrigation Pipe With Rubber Gasket Joints (Metric)
• ASTM C506 – Reinforced Concrete Arch Culvert, Storm Drain, and Sewer Pipe
• ASTM C506M – Reinforced Concrete Arch Culvert, Storm Drain, and Sewer Pipe (Metric)
• ASTM C507 – Reinforced Concrete Elliptical Culvert, Storm Drain, and Sewer Pipe
• ASTM C507M – Reinforced Concrete Elliptical Culvert, Storm Drain, and Sewer Pipe (Metric)
• ASTM C508 – Asbestos-Cement Underdrain Pipe
• ASTM C512 – Creep of Concrete in Compression
• ASTM C514 – Nails for the Application of Gypsum Board
• ASTM C530 – Structural Clay Nonloadbearing Screen Tile
• ASTM C541 – Linings for Asbestos-Cement Pipe
• ASTM C551 – Asbestos-Cement Fiberboard Insulating Panels
• ASTM C586 – Potential Alkali Reactivity of Carbonate Rocks as Concrete Aggregates (Rock-Cylinder Method)
• ASTM C587 – Gypsum Veneer Plaster
• ASTM C588 – Gypsum Base for Veneer Plasters
• ASTM C593 – Fly Ash and Other Pozzolans for Use With Lime for Soil Stabilization
• ASTM C597 – Pulse Velocity Through Concrete
• ASTM C602 – Agricultural Liming Materials
• ASTM C604 – True Specific Gravity of Refractory Materials by Gas-Comparison Pycnometer
• ASTM C630 – Water-Resistant Gypsum Backing Board
• ASTM C631 – Bonding Compounds for Interior Gypsum Plastering
• ASTM C637 – Aggregates for Radiation-Shielding Concrete
• ASTM C638 – Constituents of Aggregates for Radiation-Shielding Concrete
• ASTM C641 – Iron Staining Materials in Lightweight Concrete Aggregates
• ASTM C642 – Density, Absorption, and Voids in Hardened Concrete
• ASTM C645 – Nonstructural Steel Framing Members
• ASTM C654 – Porous Concrete Pipe
• ASTM C654M – Porous Concrete Pipe (Metric)
• ASTM C655 – Reinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe
• ASTM C655M – Reinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe (Metric)
• ASTM C659 – Asbestos-Cement Organic-Foam Core Insulating Panels
• ASTM C663 – Asbestos-Cement Storm Drain Pipe
• ASTM C668 – Asbestos-Cement Transmission Pipe
• ASTM C670 – Preparing Precision and Bias Statements for Test Methods for Construction Materials
• ASTM C671 – Critical Dilation of Concrete Specimens Subjected to Freezing
• ASTM C672 – Scaling Resistance of Concrete Surfaces Exposed to Deicing Chemicals
• ASTM C682 – Evaluation of Frost Resistance of Coarse Aggregates in Air-Entrained Concrete by Critical Dilation Procedures
• ASTM C684 – Making, Accelerated Curing, and Testing Concrete Compression Test Specimens
• ASTM C685 – Concrete Made by Volumetric Batching and Continuous Mixing
• ASTM C688 – Functional Additions for Use in Hydraulic Cements
• ASTM C700 – Vitrified Clay Pipe, Extra Strength, Standard Strength, and Perforated
• ASTM C706 – Limestone for Animal Feed Use
• ASTM C725 – Semidense Mineral Fiber Siding
• ASTM C736 – Extension-Recovery and Adhesion of Latex Sealants
• ASTM C737 – Limestone for Dusting of Coal Mines
• ASTM C744 – Prefaced Concrete and Calcium Silicate Masonry Units
• ASTM C746 – Corrugated Asbestos-Cement Sheets for Bulkheading
• ASTM C754 – Installation of Steel Framing Members to Receive Screw-Attached Gypsum Panel Products
• ASTM C778 – Standard Sand
• ASTM C786 – Fineness of Hydraulic Cement and Raw Materials by the 300-μm (No. 50), 150-μm (No. 100), and 75-μm (No. 200) Sieves by Wet Methods
• ASTM C789 – Precast Reinforced Concrete Box Sections for Culverts, Storm Drains, and Sewers
• ASTM C789M – Precast Reinforced Concrete Box Sections for Culverts, Storm Drains, and Sewers [Metric]
• ASTM C801 – Determining the Mechanical Properties of Hardened Concrete Under Triaxial Loads
• ASTM C802 – Conducting an Interlaboratory Test Program to Determine the Precision of Test Methods for Construction Materials
• ASTM C806 – Restrained Expansion of Expansive Cement Mortar
• ASTM C807 – Time of Setting of Hydraulic Cement Mortar by Modified Vicat Needle
• ASTM C821 – Lime for Use with Pozzolans
• ASTM C822 – Terminology Relating to Concrete Pipe and Related Products
• ASTM C825 – Precast Concrete Barriers
• ASTM C827 – Change in Height at Early Ages of Cylindrical Specimens of Cementitious Mixtures
• ASTM C828 – Low-Pressure Air Test of Vitrified Clay Pipe Lines
• ASTM C840 – Application and Finishing of Gypsum Board
• ASTM C842 – Application of Interior Gypsum Plaster
• ASTM C843 – Application of Gypsum Veneer Plaster
• ASTM C844 – Application of Gypsum Base to Receive Gypsum Veneer Plaster
• ASTM C845 – Expansive Hydraulic Cement
• ASTM C847 – Metal Lath
• ASTM C850 – Precast Reinforced Concrete Box Sections for Culverts, Storm Drains, and Sewers with Less Than 2 ft of Cover Subjected to Highway Loadings
• ASTM C850M – Precast Reinforced Concrete Box Sections for Culverts, Storm Drains, and Sewers with Less Than 0.6 m of Cover Subjected to Highway Loadings [Metric]
• ASTM C857 – Practice Minimum Structural Design Loading for Underground Precast Concrete Utility Structures
• ASTM C858 – Underground Precast Concrete Utility Structures
• ASTM C875 – Asbestos-Cement Conduit
• ASTM C876 – Corrosion Potentials of Uncoated Reinforcing Steel in Concrete
• ASTM C877 – External Sealing Bands for Concrete Pipe, Manholes, and Precast Box Sections
• ASTM C877M – External Sealing Bands for Concrete Pipe, Manholes, and Precast Box Sections (Metric)
• ASTM C878 – Restrained Expansion of Shrinkage-Compensating Concrete
• ASTM C881 – Epoxy-Resin-Base Bonding Systems for Concrete
• ASTM C882 – Bond Strength of Epoxy-Resin Systems Used With Concrete By Slant Shear
• ASTM C884 – Thermal Compatibility Between Concrete and an Epoxy-Resin Overlay
• ASTM C887 – Packaged, Dry, Combined Materials for Surface Bonding Mortar
• ASTM C897 – Aggregate for Job-Mixed Portland Cement-Based Plasters
• ASTM C890 – Practice Minimum Structural Design Loading for Monolithic or Sectional Precast Concrete Water and Wastewater Structures
• ASTM C891 – Practice Installation of Underground Precast Concrete Utility Structures
• ASTM C896 – Terminology Relating to Clay Products
• ASTM C901 – Prefabricated Masonry Panels
• ASTM C902 – Pedestrian and Light Traffic Paving Brick
• ASTM C911 – Quicklime, Hydrated Lime, and Limestone for Selected Chemical and Industrial Uses
• ASTM C913 – Precast Concrete Water and Wastewater Structures
• ASTM C915 – Precast Reinforced Concrete Crib Wall Members
• ASTM C917 – Evaluation of Variability of Cement from a Single Source Based on Strength
• ASTM C918 – Measuring Early-Age Compressive Strength and Projecting Later-Age Strength
• ASTM C923 – Resilient Connectors Between Reinforced Concrete Manhole Structures, Pipes, and Laterals
• ASTM C923M – Resilient Connectors Between Reinforced Concrete Manhole Structures, Pipes, and Laterals (Metric)
• ASTM C924 – Practice Testing Concrete Pipe Sewer Lines by Low-Pressure Air Test Method
• ASTM C924M – Practice Testing Concrete Pipe Sewer Lines by Low-Pressure Air Test Method (Metric)
• ASTM C926 – Application of Portland Cement-Based Plaster
• ASTM C931 – Exterior Gypsum Soffit Board
• ASTM C932 – Surface-Applied Bonding Compounds for Exterior Plastering
• ASTM C933 – Welded Wire Lath
• ASTM C935 – General Requirements for Prestressed Concrete Poles Statically Cast
• ASTM C938 – Proportioning Grout Mixtures for Preplaced-Aggregate Concrete
• ASTM C939 – Flow of Grout for Preplaced-Aggregate Concrete (Flow Cone Method)
• ASTM C940 – Expansion and Bleeding of Freshly Mixed Grouts for Preplaced-Aggregate Concrete in the Laboratory
• ASTM C941 – Water Retentivity of Grout Mixtures for Preplaced-Aggregate Concrete in the Laboratory
• ASTM C943 – Making Test Cylinders and Prisms for Determining Strength and Density of Preplaced-Aggregate Concrete in the Laboratory
• ASTM C944 – Abrasion Resistance of Concrete or Mortar Surfaces by the Rotating-Cutter Method
• ASTM C946 – Practice Construction of Dry-Stacked, Surface-Bonded Walls
• ASTM C947 – Flexural Properties of Thin-Section Glass-Fiber-Reinforced Concrete (Using Simple Beam With Third-Point Loading)
• ASTM C948 – Dry and Wet Bulk Density, Water Absorption, and Apparent Porosity of Thin Sections of Glass-Fiber Reinforced Concrete
• ASTM C952 – Bond Strength of Mortar to Masonry Units
• ASTM C953 – Time of Setting of Grouts for Preplaced-Aggregate Concrete in the Laboratory
• ASTM C955 – Cold-Formed Steel Structural Framing Members
• ASTM C956 – Installation of Cast-In-Place Reinforced Gypsum Concrete
• ASTM C960 – Predecorated Gypsum Board
• ASTM C966 – Guide for Installing Asbestos-Cement Nonpressure Pipe
• ASTM C969 – Practice Infiltration and Exfiltration Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines
• ASTM C969M – Practice Infiltration and Exfiltration Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines (Metric)
• ASTM C977 – Quicklime and Hydrated Lime for Soil Stabilization
• ASTM C979 – Pigments for Integrally Colored Concrete
• ASTM C980 – Industrial Chimney Lining Brick
• ASTM C985 – Nonreinforced Concrete Specified Strength Culvert, Storm Drain, and Sewer Pipe
• ASTM C985M – Nonreinforced Concrete Specified Strength Culvert, Storm Drain, and Sewer Pipe (Metric)
• ASTM C990 – Joints for Concrete Pipe, Manholes, and Precast Box Sections Using Preformed Flexible Joint Sealants
• ASTM C990M – Joints for Concrete Pipe, Manholes, and Precast Box Sections Using Preformed Flexible Joint Sealants (Metric)
• ASTM C995 – Time of Flow of Fiber-Reinforced Concrete Through Inverted Slump Cone
• ASTM C1002 – Steel Self-Piercing Tapping Screws for Application of Gypsum Panel Products or Metal Plaster Bases to Wood Studs or Steel Studs
• ASTM C1005 – Reference Masses and Devices for Determining Mass and Volume for Use in Physical Testing of Hydraulic Cements
• ASTM C1007 – Installation of Load Bearing (Transverse and Axial) Steel Studs and Related Accessories
• ASTM C1018 – Flexural Toughness and First-Crack Strength of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading)
• ASTM C1032 – Woven Wire Plaster Base
• ASTM C1037 – Practice Inspection of Underground Precast Concrete Utility Structures
• ASTM C1042 – Bond Strength of Latex Systems Used With Concrete By Slant Shear
• ASTM C1047 – Accessories for Gypsum Wallboard and Gypsum Veneer Base
• ASTM C1059 – Latex Agents for Bonding Fresh To Hardened Concrete
• ASTM C1063 – Installation of Lathing and Furring to Receive Interior and Exterior Portland Cement-Based Plaster
• ASTM C1067 – Conducting a Ruggedness Evaluation or Screening Program for Test Methods for Construction Materials
• ASTM C1072 – Measurement of Masonry Flexural Bond Strength
• ASTM C1073 – Hydraulic Activity of Slag Cement by Reaction with Alkali
• ASTM C1074 – Estimating Concrete Strength by the Maturity Method
• ASTM C1080 – Asbestos-Cement Products Other Than Fill For Cooling Towers
• ASTM C1081 – Asbestos-Cement Corrugated Fill For Use in Cooling Towers
• ASTM C1082 – Asbestos-Cement Flat Sheet for Cooling Tower Fill
• ASTM C1084 – Portland-Cement Content of Hardened Hydraulic-Cement Concrete
• ASTM C1088 – Thin Veneer Brick Units Made From Clay or Shale
• ASTM C1089 – Spun Cast Prestressed Concrete Poles
• ASTM C1090 – Measuring Changes in Height of Cylindrical Specimens of Hydraulic-Cement Grout
• ASTM C1091 – Hydrostatic Infiltration Testing of Vitrified Clay Pipe Lines
• ASTM C1096 – Determination of Wood Fiber in Asbestos Cement
• ASTM C1097 – Hydrated Lime for Use in Asphalt Cement or Bituminous Paving Mixtures
• ASTM C1102 – Time of Setting of Portland-Cement Pastes Containing Quick-Setting Accelerating Admixtures for Shotcrete by the Use of Gillmore Needles
• ASTM C1103 – Practice Joint Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines
• ASTM C1103M – Practice Joint Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines (Metric)
• ASTM C1117 – Time of Setting of Shotcrete Mixtures by Penetration Resistance
• ASTM C1119 – Vacuum Drainage of Asbestos-Cement Mixes
• ASTM C1120 – Wash Test of Asbestos
• ASTM C1121 – Turner and Newall (T and N) Wet-Length Classification of Asbestos
• ASTM C1122 – Wet Volume of Asbestos
• ASTM C1123 – Compressibility and Recovery of Asbestos
• ASTM C1124 – Kerosene Retention of Asbestos
• ASTM C1131 – Practice Least Cost (Life Cycle) Analysis of Concrete Culvert, Storm Sewer, and Sanitary Sewer Systems
• ASTM C1137 – Degradation of Fine Aggregate Due to Attrition
• ASTM C1138 – Abrasion Resistance of Concrete (Underwater Method)
• ASTM C1141 – Admixtures for Shotcrete
• ASTM C1142 – Extended Life Mortar for Unit Masonry
• ASTM C1148 – Measuring the Drying Shrinkage of Masonry Mortar
• ASTM C1150 – The Break-Off Number of Concrete
• ASTM C1151 – Evaluating the Effectiveness of Materials for Curing Concrete
• ASTM C1154 – Terminology for Non-Asbestos Fiber-Reinforced Cement Products
• ASTM C1162 – Loose Density of Asbestos
• ASTM C1164 – Evaluation of Limestone or Lime Uniformity From a Single Source
• ASTM C1167 – Clay Roof Tiles
• ASTM C1170 – Determining Consistency and Density of Roller-Compacted Concrete Using a Vibrating Table
• ASTM C1176 – Making Roller-Compacted Concrete in Cylinder Molds Using a Vibrating Table
• ASTM C1177 – Glass Mat Gypsum Substrate for Use as Sheathing
• ASTM C1178 – Coated Glass Mat Water-Resistant Gypsum Backing Panel
• ASTM C1181 – Compressive Creep of Chemical-Resistant Polymer Machinery Grouts
• ASTM C1185 – Sampling and Testing Non-Asbestos Fiber-Cement Flat Sheet, Roofing and Siding Shingles, and Clapboards
• ASTM C1186 – Flat Fiber-Cement Sheets
• ASTM C1194 – Compressive Strength of Architectural Cast Stone
• ASTM C1195 – Absorption of Architectural Cast Stone
• ASTM C1196 – In Situ Compressive Stress Within Solid Unit Masonry Estimated Using Flatjack Measurements
• ASTM C1197 – In Situ Measurement of Masonry Deformability Properties Using the Flatjack Method
• ASTM C1202 – Electrical Indication of Concrete’s Ability to Resist Chloride Ion Penetration
• ASTM C1208 – Vitrified Clay Pipe and Joints for Use in Microtunneling, Sliplining, Pipe Bursting, and Tunnels
• ASTM C1209 – Terminology of Concrete Masonry Units and Related Units
• ASTM C1214 – Concrete Pipe Sewerlines by Negative Air Pressure (Vacuum) Test Method
• ASTM C1214M – Concrete Pipe Sewerlines by Negative Air Pressure (Vacuum) Test Method (Metric)
• ASTM C1225 – Fiber-Cement Roofing Shingles, Shakes, and Slates
• ASTM C1226 – Soluble Chlorides in Asbestos
• ASTM C1227 – Precast Concrete Septic Tanks
• ASTM C1228 – Practice Preparing Coupons for Flexural and Washout Tests on Glass Fiber Reinforced Concrete
• ASTM C1229 – Determination of Glass Fiber Content in Glass Fiber Reinforced Concrete (GFRC) (Wash-Out Test)
• ASTM C1230 – Performing Tension Tests on Glass-Fiber Reinforced Concrete (GFRC) Bonding Pads
• ASTM C1232 – Terminology for Masonry
• ASTM C1244 – Concrete Sewer Manholes by the Negative Air Pressure (Vacuum) Test Prior to Backfill
• ASTM C1244M – Concrete Sewer Manholes by the Negative Air Pressure (Vacuum) Test Prior to Backfill (Metric)
• ASTM C1245 – Determining Relative Bond Strength Between Hardened Roller Compacted Concrete Lifts (Point Load Test)
• ASTM C1261 – Firebox Brick for Residential Fireplaces
• ASTM C1264 – Sampling, Inspection, Rejection, Certification, Packaging, Marking, Shipping, Handling, and Storage of Gypsum Panel Products
• ASTM C1271 – X-ray Spectrometric Analysis of Lime and Limestone
• ASTM C1272 – Heavy Vehicular Paving Brick
• ASTM C1278 – Fiber-Reinforced Gypsum Panel
• ASTM C1280 – Application of Exterior Gypsum Panel Products for Use as Sheathing
• ASTM C1283 – Practice Installing Clay Flue Lining
• ASTM C1288 – Fiber-Cement Interior Substrate Sheets
• ASTM C1298 – Guide for Design and Construction of Brick Liners for Industrial Chimneys
• ASTM C1301 – Major and Trace Elements in Limestone and Lime by Inductively Coupled Plasma-Atomic Emission Spectroscopy (ICP) and Atomic Absorption (AA)
• ASTM C1315 – Liquid Membrane-Forming Compounds Having Special Properties for Curing and Sealing Concrete
• ASTM C1318 – Determination of Total Neutralizing Capability and Dissolved Calcium and Magnesium Oxide in Lime for Flue Gas Desulfurization (FGD)
• ASTM C1324 – Examination and Analysis of Hardened Masonry Mortar
• ASTM C1325 – Fiber-Mat Reinforced Cementitious Backer Units
• ASTM C1328 – Plastic (Stucco) Cement
• ASTM C1339 – Flowability and Bearing Area of Chemical-Resistant Polymer Machinery Grouts
• ASTM C1355 – Glass Fiber Reinforced Gypsum Composites
• ASTM C1356 – Quantitative Determination of Phases in Portland Cement Clinker by Microscopical Point-Count Procedure
• ASTM C1357 – Evaluating Masonry Bond Strength
• ASTM C1362 – Flow of Freshly Mixed Hydraulic Cement Concrete
• ASTM C1364 – Architectural Cast Stone
• ASTM C1365 – Determination of the Proportion of Phases in Portland Cement and Portland-Cement Clinker Using X-Ray Powder Diffraction Analysis
• ASTM C1381 – Molded Glass Fiber Reinforced Gypsum Parts
• ASTM C1383 – Measuring the P-Wave Speed and the Thickness of Concrete Plates Using the Impact-Echo Method
• ASTM C1384 – Admixtures for Masonry Mortars
• ASTM C1386 – Precast Autoclaved Aerated Concrete (AAC) Wall Construction Units
• ASTM C1395 – Specification for Gypsum Ceiling Board
• ASTM C1396 – Gypsum Board
• ASTM C1397 – Application of Class PB Exterior Insulation and Finish Systems (EIFS) and EIFS with Drainage
• ASTM C1398 – The Laboratory Determination of the Time of Setting of Hydraulic-Cement Mortars Containing Additives for Shotcrete by the Use of Gillmore Needles
• ASTM C1400 – Guide for Reduction of Efflorescence Potential in New Masonry Walls
• ASTM C1403 – Rate of Water Absorption of Masonry Mortars
• ASTM C1404 – Bond Strength of Adhesive Systems Used with Concrete as Measured by Direct Tension
• ASTM C1405 – Glazed Brick (Single Fired, Brick Units)
• ASTM C1417 – Manufacture of Reinforced Concrete Sewer, Storm Drain, and Culvert Pipe for Direct Design
• ASTM C1417M – Manufacture of Reinforced Concrete Sewer, Storm Drain, and Culvert Pipe for Direct Design (Metric)
• ASTM C1420 – Practice Selection, Removal, and Shipment of Manufactured Masonry Units Placed in Usage
• ASTM C1433 – Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers
• ASTM C1433M – Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers (Metric)
• ASTM C1435 – Molding Roller-Compacted Concrete in Cylinder Molds Using a Vibrating Hammer
• ASTM C1436 – Materials for Shotcrete
• ASTM C1447 – Non-Asbestos Fiber-Cement Underdrain Pipe
• ASTM C1448 – Non-Asbestos Fiber-Cement Conduit
• ASTM C1449 – Non-Asbestos Fiber-Cement Nonpressure Sewer Pipe
• ASTM C1450 – Non-Asbestos Fiber-Cement Storm Drain Pipe
• ASTM C1451 – Determining Variability of Concrete-Making Materials From a Single Source
• ASTM C1452 – Reinforced Autoclaved Aerated Concrete Elements
• ASTM C1459 – Performance of Non-Asbestos Fiber-Reinforced Cement Shake, Shingle, and Slate Roofing Systems
• ASTM C1467 – Installation of Molded Glass Fiber Reinforced Gypsum Parts
• ASTM C1478 – Storm Drain Resilient Connectors Between Reinforced Concrete Storm Sewer Structures, Pipes, and Laterals
• ASTM C1478M – Storm Drain Resilient Connectors Between Reinforced Concrete Storm Sewer Structures, Pipes, and Laterals (Metric)
• ASTM C1479 – Practice Installation of Precast Concrete Sewer, Storm Drain, and Culvert Pipe Using Standard Installations
• ASTM C1479M – Practice Installation of Precast Concrete Sewer, Storm Drain, and Culvert Pipe Using Standard Installations (Metric)
• ASTM C1480 – Packaged, Pre-Blended, Dry, Combined Materials for Use in Wet or Dry Shotcrete Application
• ASTM C1489 – Lime Putty for Structural Purposes
• ASTM C1492 – Concrete Roof Tile
• ASTM C1504 – Manufacture of Precast Reinforced Concrete Three-Sided Structures for Culverts and Storm Drains
  ASTM C1504M – Manufacture of Precast Reinforced Concrete Three-Sided Structures for Culverts and Storm Drains (Metric)
• ASTM C1516 – Application of Direct-Applied Exterior Finish Systems
• ASTM C1529 – Quicklime, Hydrated Lime, and Limestone for Environmental Uses
• ASTM C1530 – Non-Asbestos Fiber-Cement Roofing Shakes, Shingles, and Slates with Designed Varying Profiles and Thicknesses
• ASTM C1531 – In Situ Measurement of Masonry Mortar Joint Shear Strength Index
• ASTM C1532 – Practice Selection, Removal, and Shipment of Manufactured Masonry Units and Masonry Specimens from Existing Construction
• ASTM C1535 – Application of Exterior Insulation and Finish Systems Class PI
• ASTM C1542 – Measuring Length of Concrete Cores
• ASTM C1543 – Determining the Penetration of Chloride Ion into Concrete by Ponding
• ASTM C1546 – Installation of Gypsum Products in Concealed Radiant Ceiling Heating Systems
• ASTM C1550 – Flexural Toughness of Fiber Reinforced Concrete (Using Centrally Loaded Round Panel)
• ASTM C1552 – Practice Capping Concrete Masonry Units, Related Units and Masonry Prisms for Compression Testing
• ASTM C1555 – Practice Autoclaved Aerated Concrete Masonry
• ASTM C1560 – Hot Water Accelerated Aging of Glass-Fiber Reinforced Cement-Based Composites
• ASTM C1565 – Determination of Pack-Set Index of Portland and Blended Hydraulic Cements
• ASTM C1568 – Wind Resistance of Concrete and Clay Roof Tiles (Mechanical Uplift Resistance Method)
• ASTM C1569 – Wind Resistance of Concrete and Clay Roof Tiles (Wind Tunnel Method)
• ASTM C1570 – Wind Resistance of Concrete and Clay Roof Tiles (Air Permeability Method)
• ASTM C1577 – Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers Designed According to AASHTO LRFD
• ASTM C1579 – Evaluating Plastic Shrinkage Cracking of Restrained Fiber Reinforced Concrete (Using a Steel Form Insert)
• ASTM C1580 – Water-Soluble Sulfate in Soil
• ASTM C1581 – Determining Age at Cracking and Induced Tensile Stress Characteristics of Mortar and Concrete under Restrained Shrinkage
• ASTM C1582 – Admixtures to Inhibit Chloride-Induced Corrosion of Reinforcing Steel in Concrete
• ASTM C1583 – Tensile Strength of Concrete Surfaces and the Bond Strength or Tensile Strength of Concrete Repair and Overlay Materials by Direct Tension (Pull-off Method)
• ASTM C1587 – Practice Preparation of Field Removed Manufactured Masonry Units and Masonry Specimens for Testing
• ASTM C1591 – Determination of the Modulus of Elasticity of Autoclaved Aerated Concrete (AAC)
• ASTM C1597M – Gypsum Wallboard (Hard Metric Sizes)
• ASTM C1600 – Rapid Hardening Hydraulic Cement
• ASTM C1601 – Field Determination of Water Penetration of Masonry Wall Surfaces
• ASTM C1602 – Mixing Water Used in the Production of Hydraulic Cement Concrete
• ASTM C1603 – Measurement of Solids in Water
• ASTM C1609 – Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading)
• ASTM C1610 – Static Segregation of Self-Consolidating Concrete Using Column Technique
• ASTM C1613 – Precast Concrete Gravity Grease Interceptor Tanks
• ASTM C1618 – Concrete Sanitary Sewer Pipe by Negative (Vacuum) Air Pressure
• ASTM C1618M – Concrete Sanitary Sewer Pipe by Negative (Vacuum) Air Pressure (Metric)
• ASTM C1619 – Elastomeric Seals for Joining Concrete Structures
• ASTM C1621 – Passing Ability of Self-Consolidating Concrete by J-Ring
• ASTM C1622 – Cold-Weather Admixture Systems
• ASTM C1623 – Manufactured Concrete Masonry Lintels
• ASTM C1628 – Joints for Concrete Gravity Flow Sewer Pipe, Using Rubber Gaskets
• ASTM C1629 – Classification for Abuse-Resistant Nondecorated Interior Gypsum Panel Products and Fiber-Reinforced Cement Panels
• ASTM C1634 – Concrete Facing Brick and Other Concrete Masonry Facing Units
• ASTM C1644 – Resilient Connectors Between Reinforced Concrete On-Site Wastewater Tanks and Pipes
• ASTM C1646 – Making and Curing Test Specimens for Evaluating Resistance of Coarse Aggregate to Freezing and Thawing in Air-Entrained Concrete
• ASTM C1658 – Glass Mat Gypsum Panels
• ASTM C1660 – Thin-bed Mortar for Autoclaved Aerated Concrete (AAC) Masonry
• ASTM C1666 – Alkali Resistant (AR) Glass Fiber for GFRC and Fiber-Reinforced Concrete and Cement
• ASTM C1675 – Practice Installation of Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers
• ASTM C1677 – Joints for Concrete Box, Using Rubber Gaskets
• ASTM C1679 – Measuring Hydration Kinetics of Hydraulic Cementitious Mixtures Using Isothermal Calorimetry
• ASTM C1686 – Practice Installation and Testing of Reinforced Autoclaved Aerated Concrete (AAC) Units
• ASTM C1691 – Unreinforced Autoclaved Aerated Concrete (AAC) Masonry Units
• ASTM C1692 – Practice Construction and Testing of Autoclaved Aerated Concrete (AAC) Masonry
• ASTM C1693 – Autoclaved Aerated Concrete (AAC)
• ASTM C1694 – Reinforced Autoclaved Aerated Concrete (AAC) Elements
• ASTM C1698 – Autogenous Strain of Cement Paste and Mortar
• ASTM C1701 – Infiltration Rate of In Place Pervious Concrete
• ASTM C1702 – Measurement of Heat of Hydration of Hydraulic Cementitious Materials Using Isothermal Conduction Calorimetry
• ASTM C1705 – Structural Cementitious Panels
• ASTM C1707 – Pozzolanic Hydraulic Lime for Structural Purposes
• ASTM C1708 – Self-leveling Mortars Containing Hydraulic Cements
• ASTM C1709 – Evaluation of Alternative Supplementary Cementitious Materials (ASCM) for Use in Concrete
• ASTM C1712 – Rapid Assessment of Static Segregation Resistance of Self-Consolidating Concrete Using Penetration Test
• ASTM C1713 – Mortars for the Repair of Historic Masonry
• ASTM C1715 – Evaluation of Water Leakage Performance of Masonry Wall Drainage Systems
• ASTM C1716 – Compression Testing Machine Requirements for Concrete Masonry Units, Related Units, and Prisms
• ASTM C1717 – Conducting Strength Tests of Masonry Wall Panels
• ASTM C1719 – Installed Precast Concrete Tanks and Accessories by the Negative Air Pressure (Vacuum) Test Prior to Backfill
• ASTM C1723 – Examination of Hardened Concrete Using Scanning Electron Microscopy
• ASTM C1731 – Concrete Floor Tile
• ASTM C1732 – Practice Installation of Concrete Floor Tiles
• ASTM C1738 – High-Shear Mixing of Hydraulic Cement Pastes
• ASTM C1740 – Evaluating the Condition of Concrete Plates Using the Impulse-Response Method
• ASTM C1741 – Bleed Stability of Cementitious Post-Tensioning Tendon Grout
• ASTM C1745 – Measurement of Hydraulic Characteristics of Hydrodynamic Stormwater Separators and Underground Settling Devices
• ASTM C1746 – Measurement of Suspended Sediment Removal Efficiency of Hydrodynamic Stormwater Separators and Underground Settling Devices
• ASTM C1747 – Determining Potential Resistance to Degradation of Pervious Concrete by Impact and Abrasion
• ASTM C1749 – Measurement of the Rheological Properties of Hydraulic Cementious Paste Using a Rotational Rheometer
• ASTM C1753 – Evaluating Early Hydration of Hydraulic Cementitious Mixtures Using Thermal Measurements
• ASTM C1757 – Determination of One-Point, Bulk Water Sorption of Dried Concrete
• ASTM C1758 – Fabricating Test Specimens with Self-Consolidating Concrete
• ASTM C1760 – Bulk Electrical Conductivity of Hardened Concrete
• ASTM C1761 – Lightweight Aggregate for Internal Curing of Concrete
• ASTM C1764 – Non Metallic Plaster Bases (Lath) Used With Portland Cement Based Plaster in Vertical Wall Applications
• ASTM C1765 – Steel Fiber Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe
• ASTM C1766 – Factory-Laminated Gypsum Panel Products
• ASTM C1768 – Accelerated Curing of Concrete Cylinders
• ASTM C1776 – Wet-Cast Precast Modular Retaining Wall Units
• ASTM C1777 – Rapid Determination of the Methylene Blue Value for Fine Aggregate or Mineral Filler Using a Colorimeter
• ASTM C1778 – Reducing the Risk of Deleterious Alkali-Aggregate Reaction in Concrete
• ASTM C1780 – Practice Installation Methods for Cement-based Adhered Masonry Veneer
• ASTM C1781 – Surface Infiltration Rate of Permeable Unit Pavement Systems
• ASTM C1782 – Segmental Concrete Paving Slabs
• ASTM C1786 – Segmental Precast Reinforced Concrete Box Sections for Culverts, Storm Drains, and Sewers Designed According to AASHTO LRFD
• ASTM C1787 – Installation of Non Metallic Plaster Bases (Lath) Used with Portland Cement Based Plaster in Vertical Wall Applications
• ASTM C1788 – Non Metallic Plaster Bases (Lath) Used With Portland Cement Based Plaster in Vertical Wall Applications
• ASTM C1789 – Calibration of Hand-Held Moisture Meters on Gypsum Panels
• ASTM C1790 – Fly Ash Facing Brick
• ASTM C1791 – Guide for Reduction of Efflorescence Potential in New Unit Pavement Systems
• ASTM C1792 – Measurement of Mass Loss versus Time for One-Dimensional Drying of Saturated Concretes
• ASTM C1795 – High-Temperature Characterization of Gypsum Boards and Panels
• ASTM C1797 – Ground Calcium Carbonate and Aggregate Mineral Fillers for use in Hydraulic Cement Concrete
• ASTM C1798 – Returned Fresh Concrete for Use in a New Batch of Ready-Mixed Concrete
• ASTM C1800 – Determining Density of Roller-Compacted Concrete Specimens Using the Gyratory Compactor
• ASTM C1802 – Design, Testing, Manufacture, Selection, and Installation of Horizontal Fabricated Metal Access Hatches for Utility, Water, and Wastewater Structures
• ASTM C1803 – Abrasion Resistance of Mortar Surfaces Using a Rotary Platform Abraser
• ASTM C1804 – Spun Cast Prestressed Concrete Bases for Tapered Steel Lighting Poles
• ASTM C1810 – Comparing Performance of Concrete-Making Materials Using Mortar Mixtures
• ASTM C1812 – Design of Journal Bearing Supports to be Used in Fiber Reinforced Concrete Beam Tests
• ASTM C1814 – Measurement of Hydraulic Characteristics of Stormwater Filtration Elements
• ASTM C1818 – Synthetic Fiber Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe
• ASTM C1821 – Practice Installation of Underground Circular Precast Concrete Manhole Structures
• ASTM C1824 – Full Scale Bending Test of Spun Prestressed Concrete Bases for Tapered Steel Lighting Poles
• ASTM C1825 – Guide for Developing Specifications for Masonry Units
• ASTM C1827 – Determination of the Air-Entraining Admixture Demand of a Cementitious Mixture
• ASTM C1837 – Production of Dry Cast Concrete Used for Manufacturing Pipe, Box, and Precast Structures
• ASTM C1840 – Practice Inspection and Acceptance of Installed Reinforced Concrete Culvert, Storm Drain, and Storm Sewer Pipe
• ASTM C1846 – Performance Based Manufacture of Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe
• ASTM C1849 – Density and Air Content (Pressure Method) of Freshly Mixed Roller-Compacted Concrete
• ASTM C1856 – Fabricating and Testing Specimens of Ultra-High Performance Concrete
• ASTM C1857 – Evaluating the Adhesion (Pull-Off) Strength of Concrete Repair and Overlay Mortar
• ASTM C1858 – Design, Construction, and Material Requirements for Direct Hung Suspended T-bar Type Ceiling Systems Intended to Receive Gypsum Panel Products in Areas Subject to Earthquake Ground Motions
• ASTM C1860 – Measurement of Tensile Strength or Bond Strength of Portland Cement-Based Plaster by Direct Tension
• ASTM C1861 – Lathing and Furring Accessories, and Fasteners, for Interior and Exterior Portland Cement-Based Plaster
• ASTM C1866 – Ground-Glass Pozzolan for Use in Concrete
• ASTM C1872 – Thermogravimetric Analysis of Hydraulic Cement
• ASTM C1874 – Measuring Rheological Properties of Cementitious Materials Using Coaxial Rotational Rheometer
• ASTM C1875 – Determination of Major and Minor Elements in Aqueous Pore Solutions of Cementitious Pastes by Inductively Coupled Plasma Optical Emission Spectroscopy (ICP-OES)
• ASTM C1876 – Bulk Electrical Resistivity or Bulk Conductivity of Concrete
• ASTM C1877 – Adhered Concrete Masonry Units
• ASTM C1881 – Closed-Loop Recycling of Scrap Gypsum Panel Products
• ASTM C1885 – Circular Precast Concrete Culvert, Storm Drain, and Sewer Pipe for Pipe Jacking
• ASTM C1889 – Minimum Structural Design Loading for Monolithic or Sectional Precast Concrete Utility, Water, and Wastewater Structures Using AASHTO LRFD Design
• ASTM C1890 – K-slump of Freshly Mixed Concrete
• ASTM C1891 – Fineness of Hydraulic Cement by Air Jet Sieving at 45-µm (No. 325)
• ASTM C1892 – Strength of Anchors in Masonry
• ASTM C1894 – Guide for Microbially Induced Corrosion of Concrete Products
• ASTM C1896 – Joints for Concrete Arch Pipe Using Profile Rubber Gaskets
• ASTM C1897 – Measuring the Reactivity of Supplementary Cementitious Materials by Isothermal Calorimetry and Bound Water Measurements
• ASTM C1898 – Determining the Chemical Resistance of Concrete Products to Acid Attack
• ASTM C1903 – Precast Concrete Duct Bank
• ASTM C1904 – Determination of the Effects of Biogenic Acidification on Concrete Antimicrobial Additives and/or Concrete Products
• ASTM C1920 – Practice Cleaning of Vitrified Clay Sanitary Sewer Pipelines
• ASTM C1921 – Comparative Impact Testing of Gypsum Panel Outside 90° Corner Systems
• ASTM D299 – Asbestos Yarns
• ASTM D315 – Woven Asbestos Tape
• ASTM D375 – Asbestos Roving
• ASTM D522 – Mandrel Bend Test of Attached Organic Coatings
• ASTM D523 – Specular Gloss
• ASTM D570 – Water Absorption of Plastics
• ASTM D610 – Evaluating Degree of Rusting on Painted Steel Surfaces
• ASTM D618 – Conditioning Plastics for Testing
• ASTM D628 – Asbestos Tubular Sleeving
• ASTM D648 – Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position
• ASTM D714 – Evaluating Degree of Blistering of Paints
• ASTM D823 – Producing Films of Uniform Thickness of Paint, Coatings and Related Products on Test Panels
• ASTM D883 – Standard Terminology Relating to Plastics
• ASTM D907 – Standard Terminology of Adhesives
• ASTM D1061 – Asbestos Lap
• ASTM D1118 – Magnetic Rating of Asbestos Fiber and Asbestos Textiles
• ASTM D1193 – Reagent Water
• ASTM D1293 – pH of Water
• ASTM D1426 – Ammonia Nitrogen In Water
• ASTM D1571 – Woven Asbestos Cloth
• ASTM D1573 – Heat Aging of Asbestos Textiles
• ASTM D1654 – Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments
• ASTM D1734 – Making Cementitious Panels for Testing Coatings
• ASTM D1918 – Asbestos Content of Asbestos Textiles
• ASTM D2100 – Asbestos Textiles Used for Electrical Insulating Purposes
• ASTM D2419 – Sand Equivalent Value of Soils and Fine Aggregate
• ASTM D2444 – Determination of the Impact Resistance of Thermoplastic Pipe and Fittings by Means of a Tup (Falling Weight)
• ASTM D2556 – Apparent Viscosity of Adhesives Having Shear-Rate-Dependent Flow Properties Using Rotational Viscometry
• ASTM D2589 – McNett Wet Classification of Dual Asbestos Fiber
• ASTM D2590 – Sampling Chrysotile Asbestos
• ASTM D2621 – Infrared Identification of Vehicle Solids From Solvent-Reducible Paints
• ASTM D2752 – Air Permeability of Asbestos Fibers
• ASTM D2946 – Terminology for Asbestos and Asbestos-Cement Products
• ASTM D2947 – Screen Analysis of Asbestos Fibers
• ASTM D2985 – Color of Asbestos
• ASTM D2987 – Moisture Content of Asbestos Fiber
• ASTM D3359 – Rating Adhesion by Tape Test
• ASTM D3639 – Classification of Asbestos by Quebec Standard Test
• ASTM D3752 – Strength Imparted by Asbestos to a Cementitious Matrix
• ASTM D3879 – Sampling Amphibole Asbestos
• ASTM D3880 – Asbestos Strength Units
• ASTM D3924 – Standard Environment for Conditioning and Testing Paint, Varnish, Lacquer, and Related Materials
• ASTM D4718 – Correction of Unit Weight and Water Content for Soils Containing Oversize Particles
• ASTM D5456 – Evaluation of Structural Composite Lumber Products
• ASTM D5519 – Particle Size Analysis of Natural and Man-Made Riprap Materials
• ASTM D5947 – Physical Dimensions of Solid Plastics Specimens
• ASTM D6249 – Alkaline Stabilization of Wastewater Treatment Plant Residuals
• ASTM D6490 – Water Vapor Transmission of NonFilm Forming Treatments Used on Cementitious Panels
• ASTM D7033 – Establishing Design Capacities for Oriented Strand Board (OSB) Wood-Based Structural-Use Panels
• ASTM E1 – ASTM Liquid-in-Glass Thermometers
• ASTM E10 – Brinell Hardness of Metallic Materials
• ASTM E21 – Elevated Temperature Tension Tests of Metallic Materials
• ASTM E23 – Notched Bar Impact Testing of Metallic Materials
• ASTM E45 – Determining the Inclusion Content of Steel
• ASTM E77 – Inspection and Verification of Thermometers
• ASTM E92 – Vickers Hardness and Knoop Hardness of Metallic Materials
• ASTM E104 – Maintaining Constant Relative Humidity by Means of Aqueous Solutions
• ASTM E112 – Determining Average Grain Size
• ASTM E290 – Bend Testing of Material for Ductility
• ASTM E308 – Computing the Colors of Objects by Using the CIE System
• ASTM E384 – Knoop and Vickers Hardness of Materials
• ASTM E399 – Linear-Elastic Plane-Strain Fracture Toughness of Metallic Materials
• ASTM E514 – Water Penetration and Leakage Through Masonry
• ASTM E608 – Mineral-Insulated, Metal-Sheathed Base Metal Thermocouples
• ASTM E691 – Conducting an Interlaboratory Study to Determine the Precision of a Test Method
• ASTM E1077 – Estimating the Depth of Decarburization of Steel Specimens
• ASTM E1137 – Industrial Platinum Resistance Thermometers
• ASTM E1730 – Rigid Foam for Use in Structural Sandwich Panel Cores
• ASTM E1820 – Measurement of Fracture Toughness
• ASTM E2174 – On-Site Inspection of Installed Firestop Systems
• ASTM E2393 – On-Site Inspection of Installed Fire Resistive Joint Systems and Perimeter Fire Barriers
• ASTM E3317 – Silica-Based Sediments for the Evaluation of Stormwater Treatment Devices
• ASTM E3318 – Terminology for Standards Relating to Stormwater Control Measures
• ASTM E3332 – Determining Trash and/or Debris Capture Performance of Stormwater Control Measures
• ASTM F432 – Roof and Rock Bolts and Accessories
• ASTM F436M – Hardened Steel Washers [Metric]
• ASTM F467 – Nonferrous Nuts for General Use
• ASTM F467M – Nonferrous Nuts for General Use (Metric)
• ASTM F468 – Nonferrous Bolts, Hex Cap Screws, Socket Head Cap Screws, and Studs for General Use
• ASTM F468M – Nonferrous Bolts, Hex Cap Screws, and Studs for General Use (Metric)
• ASTM F541 – Alloy Steel Eyebolts
• ASTM F547 – Terminology of Nails for Use with Wood and Wood-Base Materials
• ASTM F568M – Carbon and Alloy Steel Externally Threaded Metric Fasteners
• ASTM F592 – Terminology of Collated and Cohered Fasteners and Their Application Tools
• ASTM F593 – Stainless Steel Bolts, Hex Cap Screws, and Studs
• ASTM F594 – Stainless Steel Nuts
• ASTM F606M – Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets (Metric)
• ASTM F680 – Test Methods for Nails
• ASTM F738M – Stainless Steel Metric Bolts, Screws, and Studs
• ASTM F788 – Surface Discontinuities of Bolts, Screws, Studs, and Rivets, Inch and Metric Series
• ASTM F835 – Alloy Steel Socket Button and Flat Countersunk Head Cap Screws
• ASTM F836M – Style 1 Stainless Steel Metric Nuts (Metric)
• ASTM F837 – Stainless Steel Socket Head Cap Screws
• ASTM F837M – Stainless Steel Socket Head Cap Screws [Metric]
• ASTM F871M – Specification for Electrodeposited Coatings on Threaded Components [Metric]
• ASTM F879 – Stainless Steel Socket Button and Flat Countersunk Head Cap Screws
• ASTM F879M – Stainless Steel Socket Button and Flat Countersunk Head Cap Screws (Metric)
• ASTM F880 – Stainless Steel Socket, Square Head, and Slotted Headless-Set Screws
• ASTM F880M – Stainless Steel Socket Set Screws (Metric)
• ASTM F901 – Aluminum Transmission Tower Bolts and Nuts
• ASTM F912 – Alloy Steel Socket Set Screws
• ASTM F912M – Alloy Steel Socket Set Screws (Metric)
• ASTM F959M – Compressible-Washer-Type Direct Tension Indicators for Use With Structural Fasteners (Metric)
• ASTM F1135 – Cadmium or Zinc Chromate Organic Corrosion Protective Coating for Fasteners
• ASTM F1136 – Zinc/Aluminum Corrosion Protective Coatings for Fasteners
• ASTM F1136M – Zinc/Aluminum Corrosion Protective Coatings for Fasteners [Metric]
• ASTM F1137 – Phosphate/Oil Corrosion Protective Coatings for Fasteners
• ASTM F1428 – Aluminum Particle-Filled Basecoat/Organic or Inorganic Topcoat, Corrosion Protective Coatings for Fasteners
• ASTM F1554 – Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength
• ASTM F1667 – Driven Fasteners: Nails, Spikes, and Staples
• ASTM F1789 – Terminology for F16 Mechanical Fasteners
• ASTM F1940 – Process Control Verification to Prevent Hydrogen Embrittlement in Plated or Coated Fasteners
• ASTM F1941 – Electrodeposited Coatings on Mechanical Fasteners, Inch and Metric
• ASTM F1941M – Electrodeposited Coatings on Threaded Fasteners [Metric]
• ASTM F2281 – Stainless Steel and Nickel Alloy Bolts, Hex Cap Screws, and Studs, for Heat Resistance and High Temperature Applications
• ASTM F2282 – Quality Assurance Requirements for Carbon and Alloy Steel Wire, Rods, and Bars for Mechanical Fasteners
• ASTM F2328 – Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws, Studs, and Nuts
• ASTM F2329 – Zinc Coating, Hot-Dip, Requirements for Application to Carbon and Alloy Steel Bolts, Screws, Washers, Nuts, and Special Threaded Fasteners
• ASTM F2403 – Inch Series Machine Screws, Carbon Steel, 60 000 psi Tensile Strength
• ASTM F2482 – Load-Indicating Externally Threaded Fasteners
• ASTM F2660 – Qualifying Coatings for Use on F3125 Grade A490 Structural Bolts Relative to Environmental Hydrogen Embrittlement
• ASTM F2674 – Zinc Coating, Hot-Dip, Requirements for Application to Carbon and Alloy Steel Bolts, Screws, Washers, Nuts, and Special Threaded Fasteners [Metric]
• ASTM F2688 – System-Based, Customer-Centered Quality Plan for Manufacturers
• ASTM F2832 – Accelerated Corrosion Testing for Mechanical Fasteners
• ASTM F2833 – Corrosion Protective Fastener Coatings with Zinc Rich Base Coat and Aluminum Organic/Inorganic Type
• ASTM F2882 – Screws, Alloy Steel, Heat Treated, 170 ksi and 1170 MPa Minimum Tensile Strength (Inch and Metric)
• ASTM F3019 – Chromium Free Zinc-Flake Composite, with or without Integral Lubricant, Corrosion Protective Coatings for Fasteners
• ASTM F3042 – Nonferrous Hex Socket, Slotted Headless, and Square Head Set Screws
• ASTM F3111 – Heavy Hex Structural Bolt/Nut/Washer Assemblies, Alloy Steel, Heat Treated, 200 ksi Minimum Tensile Strength
• ASTM F3148 – High Strength Structural Bolt Assemblies, Steel and Alloy Steel, Heat Treated, 144ksi Minimum Tensile Strength, Inch Dimensions
• ASTM F3359 – Determining Bending Yield Moment of Staples
• ASTM F3393 – Zinc-Flake Coating Systems for Fasteners
• ASTM F3043 – “Twist Off” Type Tension Control Structural Bolt/Nut/Washer Assemblies, Alloy Steel, Heat Treated, 200 ksi Minimum Tensile Strength
• ASTM F3125 – High Strength Structural Bolts and Assemblies, Steel and Alloy Steel, Heat Treated, Inch Dimensions 120 ksi and 150 ksi Minimum Tensile Strength, and Metric Dimensions 830 MPa and 1040 MPa Minimum Tensile Strength
• ASTM G28 – Detecting Susceptibility to Intergranular Corrosion in Wrought, Nickel-Rich, Chromium-Bearing Alloys
• ASTM G48 – Pitting and Crevice Corrosion Resistance of Stainless Steels and Related Alloys by Use of Ferric Chloride Solution
• ASTM G51 – Measuring pH of Soil for Use in Corrosion Testing
• ASTM G87 – Conducting Moist SO2 Tests
• BS EN 1767 – Products and systems for the protection and repair of concrete structures. Test methods. Infrared analysis
• BS EN 10247 – Micrographic Examination of the Non-Metallic Inclusion Content of Steels Using Standard Pictures
• BS EN 10346 – Continuously Hot-Dip Coated Steel Flat Products for Cold Forming. Technical Delivery Conditions