AASHTO Accredited
Testing Services for your PRoductS and materiaLs
AASHTO Accreditation
Applied Testing & Geosciences, LLC is accredited by AASHTO (American Association of State Highway and Transportation Officials) for testing of construction materials.
Applied Testing & Geosciences, LLC has demonstrated proficiency for the testing of construction materials and has conformed to the requirements established in AASHTO R 18 and the AASHTO Accreditation policies established by the AASHTO Committee on Materials and Pavements.
You can access the AASHTO accreditation certificate.
Quality Management System
- AASHTO R18 – Establishing and Implementing a Quality System for Construction Materials Testing Laboratories
- ASTM C1077 (Aggregate) – Laboratories Testing Concrete and Concrete Aggregates
- ASTM C1077 (Concrete) – Laboratories Testing Concrete and Concrete Aggregates
- ASTM C1222 (Cement) – Evaluation of Laboratories Testing Hydraulic Cement
Aggregate
- AASHTO T11 – Materials Finer Than 75-μm (No. 200) Sieve in Mineral Aggregates by Washing
- AASHTO T27 – Sieve Analysis of Fine and Coarse Aggregates
- AASHTO T84 – Specific Gravity (Relative Density) and Absorption of Fine Aggregate
- AASHTO T85 – Specific Gravity and Absorption of Coarse Aggregate
- ASTM C117 – Materials Finer Than 75-μm (No. 200) Sieve in Mineral Aggregates by Washing
- ASTM C127 – Specific Gravity and Absorption of Coarse Aggregate
- ASTM C128 – Specific Gravity (Relative Density) and Absorption of Fine Aggregate
- ASTM C136 – Sieve Analysis of Fine and Coarse Aggregates
Concrete
- ASTM C31 – Making and Curing Concrete Test Specimens in the Field
- ASTM C39 – Compressive Strength of Cylindrical Concrete Specimens
- ASTM C78 – Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
- ASTM C138 – Density (Unit Weight), Yield, and Air Content of Concrete
- ASTM C143 – Slump of Hydraulic Cement Concrete
- ASTM C157 – Length Change of Hardened Hydraulic-Cement, Mortar, and Concrete
- ASTM C172 – Sampling Freshly Mixed Concrete
- ASTM C192 – Making and Curing Concrete Test Specimens in the Laboratory
- ASTM C215 – Fundamental Transverse, Longitudinal and Torsional Frequencies of Concrete Specimens
- ASTM C231 – Air Content of Freshly Mixed Concrete by the Pressure Method
- ASTM C403 – Time of Setting of Concrete Mixtures by Penetration Resistance
- ASTM C511 – Moist Cabinets, Moist Rooms, and Water Storage Tanks Used in the testing of Hydraulic Cements and Concretes
- ASTM C617 (8000 psi and below) – Capping Cylindrical Concrete Specimens
- ASTM C666 – Resistance of Concrete to Rapid Freezing and Thawing
- ASTM C1064 – Temperature of Freshly Mixed Portland Cement Concrete
- ASTM C1231 (7000 psi and below) – Use of Unbonded Caps in Determination of Compressive Strength of Hardened Concrete Cylinders
Cement – Physical Tests
- ASTM C109 – Compressive Strength of Hydraulic Cement Mortars (Using 2-in. Cube Specimens)
- ASTM C151 – Autoclave Expansion of Portland Cement
- ASTM C157 – Length Change of Hardened Hydraulic-Cement, Mortar, and Concrete
- ASTM C183 – Sampling and the Amount of Testing of Hydraulic Cement
- ASTM C185 – Air Content of Hydraulic Cement Mortar
- ASTM C187 – Normal Consistency of Hydraulic Cement
- ASTM C188 – Density of Hydraulic Cement
- ASTM C191 – Time of Setting of Hydraulic Cement by Vicat Needle
- ASTM C305 – Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency
- ASTM C430 – Fineness of Hydraulic Cement by the 45-μm (No. 325) Sieve
- ASTM C451 – Early Stiffening of Hydraulic Cement (Paste Method)
- ASTM C511 – Moist Cabinets, Moist Rooms, and Water Storage Tanks Used in the testing of Hydraulic Cements and Concretes
- ASTM C1038 – Expansion of Hydraulic Cement Mortar Bars Stored in Water
- ASTM C1437 – Flow of Hydraulic Cement Mortar
- ASTM C1506 – Water Retention of Hydraulic Cement-Based Mortars and Plasters